-
UKAEA-CCFE-PR(22)572022
The LOCUST GPU code has been applied to study the fast-ion transport caused by resonant magnetic perturbations in the high-performance Q = 10 ITER baseline scenario. The computational speed of the code is used calculate the impact of the ITER ELM-control-coil system on neutral beam heating efficiency, as well as producing detailed predictions o…
-
UKAEA-CCFE-PR(21)192021
A novel high-performance computing algorithm, developed in response to the next generation of computational challenges associated with burning plasma regimes in ITER-scale tokamak devices, has been tested and is described herein. LOCUST-GPU 2 The Lorentz-Orbit Code for Use in Stellarators and Tokamaks (LOCUST) is designed for computationally scal…
-
UKAEA-CCFE-CP(20)792018
The Chinese Fusion Engineering Test Reactor (CFETR) bridges the gap between ITER and a demonstration fusion power plant (DEMO). The primary objectives of CFETR are: demonstrate tritium self-sufficiency, ~1GW fusion power, operate in steady-state and have a duty cycle of 0.3-0.5 [1]. CFETR is in the pre-conceptual design phase and is currently envis…
-
CLM P211963
-
2014
PROCESS is a reactor systems code – it assesses the engineering and economic viability of a hypothetical fusion power station using simple models of all parts of a reactor system, from the basic plasma physics to the generation of electricity. It has has been used for many years, but details of its operation have not been previously published. Th…
-
2014
-
2012
Recent infra-red measurements of divertor power loads on JET and AUG [1], revealed that the inter-ELM power width at the outer mid-plane in attached ELMy H-modes does not exhibit any noticeable scaling with machine size [1]. Making use of these results to calculate the effective radial heat diffusivity, and then including this in parametrized expre…
-
2009
Conceptions of the aims and characteristics of DEMOs are evolving in response to world issues. Many areas are important in these considerations: two particularly important, and technically related, ones are examined here. Firstly, in the recent Strategic Energy Technology plan (SET plan) in the EU, approaches to technological development that could…
-
2005
ABSTRACT. The European Power Plant Conceptual Study (PPCS) reported in the summer of 2004. Several conceptual designs (“Models”) for commercial fusion power plants were developed, spanning a range from relatively near term to more substantial extrapolations. The parameters of the Models were chosen by systems analysis to be economically optimal…
-
2003
It is shown that electron-positron pair production is expected to occur in post-disruption plasmas in large tokamaks, including JET and JT-60U, where up to about 10 14 positrons may be created in collisions between multi-MeV runaway electrons and thermal particles. If the loop voltage is large enough, they are accelerated and form a beam of long-li…
Showing 1 - 10 of 10 UKAEA Paper Results
Page 1 of 1