-
UKAEA-CCFE-PR(23)042023
The High Field High Density Region (HFSFD) has been experimentally observed in both divertor and limiter tokamak devices. In order to numerically reproduced the HFSHD region in the limiter tokamak device J-TEXT, we first performed SOLPS-ITER simulations on the J-TEXT limiter tokamak with the activation of drifts, which is associated with the HFSHD …
-
UKAEA-CCFE-CP(23)162021
A comparison between different alternative divertor configurations, in terms of benefits and additional complexity is carried out for the European DEMO. A synergetic approach between different aspects of the problem, including physics and engineering, provides new insight on the capabilities of the new divertors to handle the exhausted power wit…
-
UKAEA-CCFE-PR(21)112021
The SOLPS-ITER simulations of European DEMO reactor, with 450 MW of power to be exhausted, show an increased operational space compared to the conventional single-null configuration. Using a reduced model with fluid neutrals and bundled impurities, we assessed the existence and the boundaries of operational space for DEMO with the conventional sing…
-
UKAEA-CCFE-CP(20)1222020
A thorough physics and engineering analysis of alternative divertor configurations is carried out by examining benefits and problems by comparing the baseline single null solution with a Snowflake, an X- and a Super-X divertor. It is observed that alternative configurations can provide margin and resilience against large power fluctuations, but the…
-
UKAEA-CCFE-CP(20)1212020
While current tokamak experiments are beginning to utilise real-time feedback control systems to manage the plasma exhaust, future tokamaks still require validation of theoretical models used to predict the threshold impurity concentration required to facilitate stationary divertor operation. This work exploits new spectroscopic measurements of …
-
CCFE-PR(16)162016
Divertor detachment in the TCV tokamak has been investigated through experiments and modelling. Density ramp experiments were carried out in ohmic heated L-mode pulses with the ion B drift directed away from the primary X-point, similar to previous studies [pitts2001]. Before the roll-over in the ion current to the outer strike point, C III and D? …
-
CCFE-PR(16)222016
An overview is given on the recent progress on edge modelling activities for the JET ITER like wall using the computational tools like the SOLPS or EDGE2D-EIRENE code. The validation process of these codes on JET with its metallic plasma-facing components is an important step towards predictive studies for ITER and DEMO in relevant divertor operati…
-
CCFE-PR(15)522015
SOLPS simulations of MAST-U have been carried out to identify in more detail the physics and operational properties of novel divertor configurations such as Super-X divertor (SXD), in particular the physics of detachment. A well diagnosed L-mode discharge from MAST has been utilised to determine L-mode transport coefficients representative for MAST…
-
CCFE-PR(17)172015
An impurity seeding scan has been simulated in three different divertor configurations of MAST-U, showing the effect of the divertor geometry on the transition to detachment. The three configurations include a conventional short divertor, a Super-X divertorwith large poloidal flux expansion and a Super-X divertor with small poloidal flux expansion.…
-
2014
One of the first studies of MAST Upgrade divertor configurations with SOLPS5.0 are presented. We focus on understanding main prospects associated with the novel geometry of the Super-X divertor (SXD). This includes a discussion of the effect of magnetic flux expansion and volumetric power losses on the reduction of target power loads, the effect of…
Showing 1 - 10 of 13 UKAEA Paper Results