-
UKAEA-CCFE-PR(20)782020
During an accident with loss-of-coolant and air ingress in DEMO, the temperature of tungsten first wall cladding may exceed 1000oC and remain for months leading to tungsten oxidation. The radioactive tungsten oxide can be mobilized to the environment at rates of 10 – 150 kg per hour. Smart tungsten-based alloys are under develop…
-
UKAEA-CCFE-CP(20)802018
The European DEMO design will potentially use single phase water cooling in various components that require protection against corrosion damage. Coolant conditions will be similar to fission PWRs but with additional considerations arising from the materials of choice (Eurofer, CuCrZr), 14 MeV neutron irradiation, the presence of tritium, and strong…
-
UKAEA-CCFE-CP(19)122019
The design and unique feature of the first MAST-U fast-ion loss detector (FILD) [M. Garcia-Muñoz, Rev. Sci. Instrum 80, 053503 (2009)] is presented here. The MAST-U FILD head is mounted on an axially and angularly actuated mechanism that makes…
-
UKAEA-CCFE-PR(19)252019
Deuterium pellets are injected into initially pure hydrogen H-mode plasma in order to control H:D isotope mixture. The pellets are deposited in outer 20% of minor radius, similar to that expected in ITER creating transiently hollow electron density profiles. The isotope mixture of H:D ~ 45:55% is obtained in the core with pellet fuelling throughput…
-
UKAEA-CCFE-PR(18)452018
In magnetic fusion devices, unwanted non-axisymmetric magnetic eld perturbations, known as error fields (EF), can have detrimental effects on plasma stability and confinement. To minimize their impact on plasma performances and on the available operational space, it is important to identify the EF sources and develop EF control strategies. MAST Up…
-
CCFE-PR(17)112017
This work presents the first evidence of helical flow in RFX-mod q(a) < 2 tokamak plasmas. The flow pattern is characterized by the presence of convective cells with m = 1 and n = 1 periodicity in the poloidal and toroidal direction, respectively. A similar helical flow deformation has been observed in the same device when operatedfas a Reversed…
-
CCFE-PR(17)222015
The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme.In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: (1)testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Super-X and otherextended leg configurations); (2) adding to the …
-
2014
A single chord two-color CO2/HeNe (10.6/0.633 µm) heterodyne laser interferometer has been designed to measure the line integral electron density along the mid-plane of the MAST Upgrade tokamak, with a typical error of 1 × 1018 m-3 (~2 phase error) at 4 MHz temporal resolution. To ensure this diagnostic system can be restored from any failures wi…
-
2014
This paper presents two different conceptual designs of neutron cameras for Mega Ampere Spherical Tokamak (MAST) Upgrade. The first one consists of two horizontal cameras, one equatorial and one vertically down-shifted by 65 cm. The second design, viewing the plasma in a poloidal section, also consists of two cameras, one radial and the other one w…
-
2014
One of the main FAST (Fusion Advanced Studies Torus) goals is to have a flexible experiment capable to test tools and scenarios for safe and reliable tokamak operation, in order to support ITER and help the final DEMO design. In particular, in this paper, we focus on operation close to a possible border of stability related to low-q operation. To t…
Showing 11 - 20 of 38 UKAEA Paper Results