S. S. Henderson M. Bernert S. Brezinsek M. Carr M. Cavedon R. Dux D. S. Gahle J. Harrison B. Lipschultz B. Lomanowski A. Meigs M. O’Mullane F. Reimold M. L. Reinke S. Wiesen the EUROfusion MST1 team the ASDEX Upgrade team JET contributors
Reducing the plasma power exhaust impacting on plasma facing components during steady state operation is one of the major design issues in future tokamaks such as ITER. Impurity seeding, e.g. with N, is one method of achieving this and has been used for a long time in tokamak research [1]. In this work we exploit a recently developed spectroscopic …
Preprint PublishedN. C. Hawkes E. Delabie S. Menmuir C. Giroud A. Meigs N. Conway T. M. Biewer D. L. Hillis
Charge-exchange spectroscopy on JET has become particularly challenging with the introduction of the ITER-like wall. The impurity spectra are weaker and contaminated by many tungsten lines. We have therefore upgraded the instrumentation to allow the simultaneous measurement of impurity and fuel-ion charge exchange by splitting the light between two…
Preprint PublishedA. R. Field I. Balboa P. Drewelow J. Flanagan C. Guillemaut J. R. Harrison A. Huber V. Huber B. Lipschultz G. Matthews A. Meigs J. Schmitz M. Stamp N. Walkden JET contributors
The dynamics and stability of divertor detachment in N2 seeded, type-I, ELMy H-mode plasmas with dominant NBI heating in the JET-ILW device is studied by means of an integrated analysis of diagnostic data from several systems, classifying data relative to the ELM times. It is thereby possible to study the response of the detachment evolution to the…
Preprint PublishedK.D. Lawson M. Groth P. Belo S. Brezinsek G. Corrigan A. Czarnecka E. Delabie P. Drewelow D. Harting I. KsiaSek C.F. Maggi C. Marchetto A.G. Meigs S. Menmuir M.F. Stamp S. Wiesen JET-EFDA Contributors
A discrepancy in the divertor radiated powers between EDGE2D-EIRENE simulations, both with and without drifts, and JET-ILW experiments employing a set of NBI-heated L-mode discharges with step-wise density variation is investigated. Results from a VUV/visible poloidally scanning spectrometer are used together with bolometric measurements to determi…
Preprint PublishedV. Parail G. Corrigan P. Da Silva Aresta Belo E. De La Luna D. Harting F. Koechl T. Koskela A. Meigs E. Militello-Asp M. Romanelli M. Tsalas JET-EFDA contributors
The influence of the ITER-like Wall (ILW) with divertor target plate made of tungsten (W), on plasma performance in JET H-mode is being investigated since 2011 (see [1] and references therein). One of the key issues in discharges with low level of D fuelling is observed accumulation of W in the plasma core, which leads to a reduction in plasma perf…
Preprint PublishedP. Jacquet V. Bobkov L. Colas A. Czarnecka E. Lerche M.-L. Mayoral I. Monakhov D. Van-Eester G. Arnoux S. Brezinsek M. Brix A.-L. Campergue S. Devaux P. Drewelow M. Graham C. C. Klepper A. Meigs D. Milanesio J. Mlynar T. Pütterich A. S
In 2011/12, JET started operation with its new ITER-Like Wall (ILW) made of a tungsten (W) divertor and a beryllium (Be) main chamber wall. The impact of the new wall materials on the JET Ion Cyclotron Resonance Frequency (ICRF) operation is assessed and some important properties of JET plasmas heated with ICRF are highlighted. A 20% reduction of t…
PublishedP. Jacquet V. Bobkov S. Brezinsek M. Brix A-L. Campergue L. Colas A. Czarnecka P. Drewelow M. Graham C. C. Klepper E. Lerche M.-L. Mayoral A. Meigs D. Milanesio I. Monakhov J. Mlynar T. Pütterich A. Sirinelli D. Van-Eester JET-EFDA
In 2011/12, JET started operation with its new ITER-Like Wall (ILW) made of a tungsten (W) divertor and a beryllium (Be) main chamber wall. The impact of the new wall material on the JET Ion Cyclotron Resonance Frequency (ICRF) operation was assessed and also the properties of JET plasmas heated with ICRF were studied. No substantial change of the …
PublishedM. Gelfusa A. Murari I. Lupelli N. Hawkes P. Gaudio M. Baruzzo M. Brix T. Craciunescu V. Drozdov A. Meigs E. Peluso M. Romanelli S. Schmuck B. Sieglin JET-EFDA Contributors
One of the main approaches to thermonuclear fusion relies on confining high temperature plasmas with properly shaped magnetic fields. The determination of the magnetic topology is, therefore, essential for controlling the experiments and for achieving the required performance. In Tokamaks, the reconstruction of the fields is typically formulated as…
PublishedA.G. Meigs S. Brezinsek M. Clever A. Huber S. Marsen C. Nicholas M.Stamp K-D Zastrow JET EFDA Contributors
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project involves a change in JET from a carbon dominated machine to a beryllium and tungsten dominated machine with residua…
Published