-
UKAEA-CCFE-PR(19)782019
A new inversion technique is presented for the identification of plasma filaments in wide-angle visible camera data. Direct inversion of camera data onto a field aligned basis is a poorly conditioned problem which is overcome by breaking the analysis into a `psuedo-inversion’ step followed by a `point spread function correction’ step. Camera …
-
UKAEA-CCFE-CP(19)202019
Reducing the plasma power exhaust impacting on plasma facing components during steady state operation is one of the major design issues in future tokamaks such as ITER. Impurity seeding, e.g. with N, is one method of achieving this and has been used for a long time in tokamak research [1]. In this work we exploit a recently developed spectroscopic …
-
UKAEA-CCFE-PR(19)472019
High bandwidth, high spatial resolution measurements of electron temperature, density and plasma potential are valuable for resolving turbulence in the boundary plasma of tokamaks. While conventional Langmuir probes can provide such measurements either their temporal or spatial resolution is limited: the former by the sweep rate necessary for obtai…
-
UKAEA-CCFE-PR(19)442019
The low energy structures of irradiation-induced defects have been studied in detail, as these determine the available modes by which a defect can diffuse or relax. As a result, there are many studies concerning the relative energies of possible defect structures, and empirical potentials are commonly fitted to or evaluated with respect to these en…
-
UKAEA-CCFE-PR(19)392019
Fusion is one of very few options for sustainable, baseload power to the grid that is necessary to meet the energy needs of future generations. The tokamak is the most advanced approach to fusion and, with the construction of ITER, we are approaching power plant conditions. While commercialisation of this key technology is a main driver for tokamak…
-
UKAEA-CCFE-CP(19)542018
Protecting the divertor in a nuclear fusion power plant is a key criteria for operation. Detailed divertor and scrape-off-layer (SOL) modelling is computationally intensive and unsuitable for a systems code. For the use of such models in systems codes they need to be simplified and made computationally fast, while still capturing the most important…
-
UKAEA-CCFE-CP(18)142018
In the present magnetically confined plasmas, the prediction of particle loading on material surfaces is a primary concern in view of the protection of plasma facing components for next step devices. Thus, an understanding of filament dynamics is needed. In this context, this work aims to develop an automatic detector for filaments arising in the M…
-
UKAEA-CCFE-CP(18)132018
The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device’s unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with ECRH was thoroughly documen…
-
UKAEA-CCFE-CP(18)122018
RACE has been developing a concept design for the remote maintenance system for the EUROfusion DEMO powerplant. Within the DEMO tokamak, tritium breeding blankets will require periodic replacement which is currently designed to utilize the upper vertical ports at the top of the vacuum vessel. This operation will be challenging due to the scale of t…
-
UKAEA-CCFE-CP(18)082018
The development of fusion as a viable power source is moving from the science driven design of experimental devices to the engineering design considerations required to develop a feasible power plant. An effective maintenance plan is essential because the time in maintenance is potentially very large. To be effective a maintenance plan must be o…
Showing 201 - 210 of 353 UKAEA Paper Results