-
CLM P571964
-
UKAEA-CCFE-CP(19)492019
This paper presents the application of the image-based finite element method (IBFEM) to quantify the impact of micro-structure caused by manufacturing processes on the performance of fusion energy heat exchangers. The components, containing tungsten, were imaged with high-power lab-based X-ray CT and neutron CT. Volume data was converted into part-…
-
UKAEA-CCFE-CP(19)262019
One of the major challenge in the commercialisation of fusion is maintaining the powerplant reactor in a sufficiently short period of time to achieve commercial levels of plant availability. To inform the development of an appropriate remote maintenance strategy for EU DEMO, a simplified, parametric model, called the Maintenance Duration Estimator …
-
UKAEA-CCFE-CP(19)142019
During ELM crashes in deuterium plasmas in the KSTAR tokamak, the emitted electromagnetic radiation includes features with sharp spectral structure in the frequency range up to ~900MHz. Cases where the spectral peaks below ~500MHz correspond to proton cyclotron harmonics at the outer midplane edge are explained (B Chapman et al., Nucl.…
-
UKAEA-CCFE-PR(19)572019
By mixing elements with favourable nuclear activation properties to create high-entropy alloys, it may be possible to create a material that can withstand a nuclear fusion environment while minimising the radioactive waste produced. Such a material could be used in the extreme thermal and irradiation conditions of a fusion blanket. A suite of previ…
-
UKAEA-CCFE-CP(18)032018
Recent results from MAST address key physics issues for ITER operations and the design of future devices, by advancing our understanding of through analysis of high-resolution data and numerical modelling. Modelling of the interaction between filaments with BOUT++ indicates filaments separated by more than 5x their width move independently, and …
-
UKAEA-CCFE-PR(19)072018
Ray-tracing techniques are applied to divertor filtered imaging, a diagnostic that has long been plagued by polluting reflected light features in metal walled fusion machines. A physically realistic surface reflection model is developed from a Cook-Torrence microfacet BRDF model. Camera calibration images of in-vessel point lights at JET are use…
-
UKAEA-CCFE-PR(18)822018
Recent experiments on TCV have made significant progress toward partial detachment of the outer divertor in neutral beam heated H-mode plasmas. The heating power required to enter H-mode was measured in a range of divertor configurations, finding that, in the vicinity of the PL-H/ne curve, the threshold power is largely independent of the poloidal …
-
UKAEA-CCFE-PR(18)662018
Functional materials’ properties are influenced by microstructures which can be changed during manufacturing. Experimental characterisation is often time consuming and expensive. A technique is presented which digitises graphite foam via X-ray tomography and converts it into image-based models to determine properties in silico. By simulating a la…
-
UKAEA-CCFE-PR(18)532018
Within a tokamak fusion energy device, the performance and lifespan of a divertor monoblock under high heat flux cycles is of particular interest. Key to this is the quality of manufacture, especially the material joining interfaces. Presented here is a comparative study between X-ray and neutron tomography to investigate the quality of manufacture…
Showing 51 - 60 of 85 UKAEA Paper Results