-
UKAEA-CCFE-PR(19)392019
Fusion is one of very few options for sustainable, baseload power to the grid that is necessary to meet the energy needs of future generations. The tokamak is the most advanced approach to fusion and, with the construction of ITER, we are approaching power plant conditions. While commercialisation of this key technology is a main driver for tokamak…
-
UKAEA-CCFE-PR(19)342019
Reduced models coupled to time-dependent axisymmetric vacuum field calculations are used to develop the prefill and feed-forward coil current targets required for reliable direct induction (DI) startup on the new MA-class spherical tokamaks, MAST-U and NSTX-U. The calculations are constrained by operational limits unique to each device, such as the…
-
UKAEA-CCFE-PR(19)292019
Two high purity tungsten powders, produced via different manufacturing techniques, were characterized to determine size distribution, morphology, thermal properties and flow characteristics and thus, the likely suitability for Laser Powder Bed Fusion (LPBF) production. Specimens from duplicate builds were produced with the two powders and character…
-
UKAEA-CCFE-PR(19)222019
A viable fusion power station is reliant on the development of plasma facing materials that can withstand the combined effects of high temperature operation and high neutron doses. In this study we focus on W, the most promising candidate material. Re is the primary transmutation product and has been shown to induce embrittlement through cluster fo…
-
UKAEA-CCFE-PR(19)212019
The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall (ILW) and will benefit from an extended and improved set of diagnostics and higher additional heating …
-
UKAEA-CCFE-PR(19)162019
The STORM module of BOUT++ [L. Easy et al., Phys. Plasmas 21, 122515 (2014)] is generalized to simulate plasma turbulence at the periphery of tokamak devices in diverted configuration and it is used to carry out three-dimensional nonlinear flux-driven simulations in double null configuration with realistic experimental par…
-
UKAEA-CCFE-PR(19)122019
Nuclear inventory simulations have a vital role to play in the planning and execution of future fusion experiments and power plants. They are able to predict the transmutation (burn-up) response of material compositions under neutron irradiation, thus providing information about the build-up of impurities that could impact on material performanc…
-
UKAEA-CCFE-PR(19)112019
Increased neutralisation and hence injected neutral beam power can be achieved by increasing the neutraliser target. This has the potential to increase the loading on the ion source backplate due to backstreaming electrons. Measurements of the backplate power loading due to backstreaming electrons are presented for the JET EP2 neutral beam injector…
-
UKAEA-CCFE-CP(19)542018
Protecting the divertor in a nuclear fusion power plant is a key criteria for operation. Detailed divertor and scrape-off-layer (SOL) modelling is computationally intensive and unsuitable for a systems code. For the use of such models in systems codes they need to be simplified and made computationally fast, while still capturing the most important…
-
UKAEA-CCFE-CP(18)132018
The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device’s unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with ECRH was thoroughly documen…
Showing 221 - 230 of 500 UKAEA Paper Results