-
UKAEA-CCFE-PR(24)2142024
In order to test the capability of the full electromagnetic DYON to predict the plasma initiation feasibility of individual discharges and thus the operating space in the device, a dedicated experimental database was built in MAST-U by scanning the prefilled gas pressure $p_0$ and the induced loop voltage $V_{loop}$ (3 failed breakdown discharge…
-
UKAEA-CCFE-PR(23)1772023
A detailed description of the Langmuir probe system on Mega Ampere Spherical Tokamak Upgrade is presented. The system features 850 tile-embedded probes and 40 bespoke electronic modules that each have the capability to drive and acquire data from up to 16 probes in a time-multiplexed manner. The system provides spatiotemporal-resolved measurements …
-
UKAEA-CCFE-CP(23)632023
The real time plasma control system for the MAST Upgrade tokamak has been substantially redeveloped from its original MAST incarnation with a new architecture that aims to manage complexity whilst maximising flexibility. It provides modular layers of functionality and supports the implementation of virtual actuators to aggregate, arbitrate and rout…
-
UKAEA-CCFE-CP(23)022023
Understanding the plasma parameters that affect the scrape off layer (SOL) width is a key issue for future tokamaks as the power entering the SOL (of order 100 MW [1] in ITER) and the SOL width (of order millimetres [2]) determine the heat flux to the divertor surfaces. The Eich scaling [2] can be used to characterise the divertor heat flux prof…
-
UKAEA-CCFE-CP(21)022021
Measurements made using flush-mounted Langmuir probes (FMPs) in tokamaks are difficult to interpret when operating at grazing angles of magnetic field incidence due to the effects of sheath expansion on the probe collection area. The super-X divertor on the upgraded Mega Ampere Spherical Tokamak (MAST-U) will have very shallow angles of magnetic fi…
-
UKAEA-CCFE-CP(19)392019
In the present work, global, three-dimensional edge plasma turbulence simulations of a MAST L-mode attached plasma discharge are presented. Our study is based on the drift-reduced Braginskii equations, solved with the STORM module of BOUT++ for realistic MAST parameters in disconnected lower double null configuration. The plasma profiles are evolve…
-
UKAEA-CCFE-PR(19)162019
The STORM module of BOUT++ [L. Easy et al., Phys. Plasmas 21, 122515 (2014)] is generalized to simulate plasma turbulence at the periphery of tokamak devices in diverted configuration and it is used to carry out three-dimensional nonlinear flux-driven simulations in double null configuration with realistic experimental par…
-
UKAEA-CCFE-CP(18)032018
Recent results from MAST address key physics issues for ITER operations and the design of future devices, by advancing our understanding of through analysis of high-resolution data and numerical modelling. Modelling of the interaction between filaments with BOUT++ indicates filaments separated by more than 5x their width move independently, and …
-
UKAEA-CCFE-PR(18)522018
Partial detachment is the desired regime for the baseline burning plasma scenario in ITER and next-step devices, as it allows to disspate the majority of the energy carried by charged particles through the scrape-off-layer (SOL) and thus avoids localised heat flux deposition in the divertor region. The COMPASS tokamak is equipped with an open diver…
-
CCFE-PR(16)162016
Divertor detachment in the TCV tokamak has been investigated through experiments and modelling. Density ramp experiments were carried out in ohmic heated L-mode pulses with the ion B drift directed away from the primary X-point, similar to previous studies [pitts2001]. Before the roll-over in the ion current to the outer strike point, C III and D? …
Showing 1 - 10 of 17 UKAEA Paper Results