-
UKAEA-CCFE-PR(24)2352024
Engineering components within a fusion reactor are subjected to extreme environments including high heat flux, strong magnetic fields, and neutron irradiation. Simulations are required to predict the in-service lifetimes of fusion components and ensuring credibility of these simulations requires validation over testable domains. Divertors are re…
-
UKAEA-CCFE-PR(24)012024
Constitutive behaviour of fusion-relevant steels in the post-necking regime is necessary for detailed design of future fusion device components. A Finite Element Model Updating (FEMU) procedure using Digital Image Correlation (DIC), a simulated DIC filter and novel constitutive law was developed. The effects of the DIC process and experimental nois…
-
UKAEA-CCFE-PR(23)1282022
Predictions of the impact of charge-exchange (CX) reactions on beam ions in the MAST Upgrade spherical tokamak have been compared to measurements carried out with a fission chamber (neutron fluxes) and a Fast Ion Deuterium-Alpha (FIDA) diagnostic. A simple model was developed to reconstruct the outer-midplane neutral density based on Thomson sca…
-
UKAEA-CCFE-PR(22)372022
Neutron flux measurements are important in fusion devices for both safety requirements and physics studies. A newsystem has been built for the Mega Amp Spherical Tokamak Upgrade (MAST Upgrade) that provides neutron count,DC and Campbell mode measurements for a 1μsperiod at 1 MHz. The acquisition system uses a Red Pitaya board tosample current from…
-
UKAEA-CCFE-PR(22)342022
The feasibility of a new approach for pipe inspection has been explored using digital twins to enhance guided wave inspection. Guided wave inspection is well-established in the oil and gas industry to screen remotely long lengths of predominately straight pipeline for corrosion. However, inspection of complex geometries of pipe remains a challen…
-
UKAEA-CCFE-CP(21)022021
Measurements made using flush-mounted Langmuir probes (FMPs) in tokamaks are difficult to interpret when operating at grazing angles of magnetic field incidence due to the effects of sheath expansion on the probe collection area. The super-X divertor on the upgraded Mega Ampere Spherical Tokamak (MAST-U) will have very shallow angles of magnetic fi…
-
UKAEA-CCFE-CP(23)242020
With MAST-U’s first plasma achieved in November 2020 and one of the key aims of the first experimental programme being to study exhaust physics, there is strong motivation to develop a new probe designed specifically for studying edge turbulence effects in the exhaust region of MAST-U. To create a new versatile probe, the design will be valida…
-
UKAEA-CCFE-CP(20)1062020
The measurement of the fusion neutron yield provides a direct relationship with fusion power and is hence an important measure of experimental performance. In pulsed neutron emission scenarios, such as those experienced in dense plasma focus devices, inertial confinement fusion and even in short-pulse tokamak experiments, considerations of the dyna…
-
UKAEA-CCFE-PR(20)812020
The suitability of post-weld heat treatments are often measured in terms of reducing residual stress and/or ensuring hardness homogeneity. Here we use detailed digital image correlation to quantify the localised deformation behaviour of laser welded Eurofer-97 both with and without a normalising and tempering treatment. This is coupled with detaile…
-
UKAEA-CCFE-PR(20)022019
Shear strain profiles along slip bands in a modified Rolls-Royce nickel superalloy (RR1000) were analyzed for tensile sample deformed by 2%. The strain increased with distance away from a grain boundary (GB), with maximum shear strain towards the center of the grain, indicating that dislocation nucleation generally occurred in the grain interior. T…
Showing 1 - 10 of 26 UKAEA Paper Results