-
UKAEA-CCFE-CP(19)482019
An understanding of the plasma edge and divertor is essential for predicting the performance of next-step machines such as ITER. Transport codes used to study the divertor behaviour [1] employ atomic physics data in two applications. The first is to predict the power radiated by the fuel and impurity atoms, which is carried out as a post-processing…
-
UKAEA-CCFE-CP(19)432019
The resonant detection and measurement of the damping rates of Alfvén Eigenmodes (AEs) is of critical importance to the design of experiments and development of models of AE stability [1]. With the Alfvén Eigenmodes Active Diagnostic (AEAD) on JET, weakly-damped Toroidal AEs (TAEs) have been probed. Theoretical modeling using the Gyrokinetic Toro…
-
UKAEA-CCFE-CP(19)412019
An n = 1 locked, or slowly rotating, mode has been observed in most pulses prior to JET disruptions. However, a small fraction of non-disruptive pulses has a locked mode which eventually vanishes without disruption. Hence, on JET the locked mode amplitude is routinely used as an indicator of unhealthy plasma. There are two threshold levels…
-
UKAEA-CCFE-CP(19)352019
In high-performance, ITER baseline-scenario pulses (3MA/2.7T) in JET-ILW with high levels (~ 32 MW) of heating power, typically ~ 20-40% of the input power is radiated, predominantly by W impurities, which are sputtered from the divertor targets and reach the confined plasma. Sustained ELMy H-mode operation at such high heating power in JET-ILW req…
-
UKAEA-CCFE-CP(19)332019
The initial Ohmic current ramp phase of JET hybrid plasmas, including a current ‘overshoot’ before the main heating, is used to optimise the q-profile shape to allow access to high β and avoid MHD instabilities [1]. Such hybrid plasmas have never been operated using tritium (T) or mixed deuterium-tritium (D-T) fuel. However, experiments with i…
-
UKAEA-CCFE-CP(19)202019
Reducing the plasma power exhaust impacting on plasma facing components during steady state operation is one of the major design issues in future tokamaks such as ITER. Impurity seeding, e.g. with N, is one method of achieving this and has been used for a long time in tokamak research [1]. In this work we exploit a recently developed spectroscopic …
-
UKAEA-CCFE-CP(19)172019
-
UKAEA-CCFE-CP(19)132019
Empirically-based power-balance calculations of the inter-ELM separatrix loss power are presented for JET pulses with both the carbon- (JET-C) and ITER-like (JET-ILW) walls, to facilitate comparisons with results of on-going, non-linear gyro-kinetic calculations of pedestal heat transport, e.g. as reported in [1]. These might be able to explain the…
-
UKAEA-CCFE-PR(19)622019
The pedestal structure, ELM losses and linear MHD stability are analysed in a series of JET-ILW H and D type I ELMy H-mode plasmas. The pedestal pressure (pPED) is typically higher in D than in H at the same input power, with the difference mainly due to lower density in H than in D. At the same input power, the pedestal electron pres…
-
UKAEA-CCFE-PR(19)522019
This work describes the behaviour of the global energy and particle confinement on JET observed in a massive database of H-mode plasmas covering almost whole lifetime of JET operations, both with carbon and metal wall. The analysis is focused on type I ELMy H-modes in stationary phases. It is shown that plasma density in that regime is determined m…
Showing 91 - 100 of 223 UKAEA Paper Results