-
UKAEA-CCFE-PR(22)632022
Classical crystal plasticity formulation based on dislocation slip was extended to include the mechanisms of dislocation channelling, with associated strain softening which is observed in many alloys post irradiation. The performance of the model was evaluated against experimental data on Zircaloy-4, which included engineering stress-strain respons…
-
UKAEA-CCFE-PR(23)932021
Magnetic feedback stabilization of the tearing mode (TM) is numerically investigated, utilizing the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681) for toroidal tokamak equilibria. Magnetic feedback generally (partially or fully) stabilizes the TM independent of the feedback coil configuration and the type of plasma equilibrium. The best c…
-
UKAEA-RACE-CP(21)032021
Driving energy consumption plays a major role in mobile robots navigating challenging environments, especially if they are left to operate unattended under limited on-board power. This paper reports on first results of an energy-aware path planner, which can provide estimates of the driving energy consumption and energy recovery of a robot traversi…
-
UKAEA-CCFE-PR(20)1132020
Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~…
-
UKAEA-CCFE-PR(20)1022020
Modification of the external tearing index, Δ’ext , by magnetic feedback is analytically investigated, for the purpose of controlling the resistive plasma resistive wall mode (RP-RWM). The matching method is pursued, by deriving expressions for the close-loop Δ’ext and by linking it to the counterpart from the inner layer. Various…
-
UKAEA-CCFE-CP(20)792018
The Chinese Fusion Engineering Test Reactor (CFETR) bridges the gap between ITER and a demonstration fusion power plant (DEMO). The primary objectives of CFETR are: demonstrate tritium self-sufficiency, ~1GW fusion power, operate in steady-state and have a duty cycle of 0.3-0.5 [1]. CFETR is in the pre-conceptual design phase and is currently envis…
-
UKAEA-CCFE-PR(19)432019
Body-centered cubic metals and alloys irradiated by energetic particles form highly mobile prismatic dislocation loops with a/2 {111} -type Burgers vectors. We show how to simulate thermal diffusion of prismatic loops using a discrete dislocation dynamics approach that explicitly includes the stochastic forces associated with ambient thermal fluctu…
-
2017
Extensive modelling efforts of the plasma response to the resonant magnetic perturbation fields, utilized for controlling the edge localized mode (ELM), help to identify the edge-peeling response as a key factor, which correlates to the observed ELM mitigation in several tokamak devices, including MAST, ASDEX Upgrade, EAST, and HL-2A. The recently …
-
CCFE-PR(16)472016
Resonant magnetic perturbations (RMP) have extensively been demonstrated as a plausible technique for mitigating or suppressing large edge localized modes (ELMs). Associated with this is a substantial amount of theory and modelling efforts during recent years. Various models describing the plasma response to the RMP fields have been proposed in the…
-
CCFE-PR(15)752015
The magnetohydrodynamic-kinetic hybrid theory has been extensively and successfully applied for interpreting experimental observations of macroscopic, low frequency instabilities, such as the resistive wall mode, in fusion plasmas. In this work, it is discovered that an analytic version of the hybrid formulation predicts a bifurcation of the mode d…
Showing 11 - 20 of 22 UKAEA Paper Results