-
UKAEA-CCFE-CP(24)132024
An overview of the modelling approaches, validation methods and recent main results of analysis and modelling activities related to the plasma-wall interaction in JET-ILW experiments, including the recent H/D/T campaigns is presented in the paper. Code applications to JET-ILW experiments improve general erosion/migration/retention prediction cap…
-
UKAEA-CCFE-PR(24)2652024
Dedicated experiments were performed on MAST Upgrade to study beam-ion losses caused by charge exchange (CX) with edge neutrals. The fuelling was switched from the high-field side to the low-field side mid-discharge. Direct measurements suggest a strong increase in neutral density around the plasma and a deterioration of the beam-ion confinement…
-
UKAEA-CCFE-PR(24)2702024
Plasma turbulence on disparate spatial and temporal scales plays a key role in defining the level of confinement achievable in tokamaks, with the development of reduced numerical models for cross-scale turbulence effects informed by experimental measurements an essential step. MAST-U is a well-equipped facility having instruments to measure ion …
-
UKAEA-CCFE-CP(24)142023
Accurate quantification of the power loss channels and overall power balance of the plasma is essential for the safe operation of current and future fusion devices. The relative magnitudes of core radiation, SOL radiation and divertor target heat loading are determining factors in both PFC design and plasma scenario design in the successful real…
-
UKAEA-CCFE-PR(24)2662024
A new type of resonant magnetic perturbation (RMP), generated by helical coils, is proposed for controlling the edge localized mode (ELM) in H-mode tokamak plasmas. The helical coil optimization utilizes the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681) computed linear resistive fluid response of the plasma to the applied RMP field. The opti…
-
UKAEA-CCFE-PR(24)2642024
Coolant-facing alloys in a tokamak will face harsh environments due to the synergistic effect of flowing coolant, mechanical cyclic loadings, and ionising radiation. Reduced activation ferritic/martensitic (RAF/M) EUROFER-97 is one of the top structural alloys selected to be used in fusion, however it was not designed to have excellent corrosi…
-
UKAEA-CCFE-PR(24)2572023
Measuring temperatures between 100 and 150 million degrees, expected to be achieved in future fusion reactors, is a great challenge. Existing methods deliver ion temperature results with a delay from 5-10 minutes to several days after taking the measurements. A promising novel approach to real-time monitoring of deuterium-tritium plasma temperature…
-
UKAEA-STEP-CP(24)052023
The STEP (Spherical Tokamak for Energy Production) Programme aims to deliver a UK prototype fusion energy plant, targeting 2040, and a path to commercial viability of fusion. To deliver on this aim, we have performed initial scoping to identify the design point for a spherical tokamak prototype powerplant producing at least 100 MWe of…
-
UKAEA-RACE-PR(24)042023
Remote handling of breeding blankets poses an unprecedented challenge in future tokamaks like EU-DEMO, where individual blanket segments can weigh upwards of 80 tonnes and extend beyond 10 meters in length. The unparalleled scale of these components, coupled with extremely tight positional tolerances, demands careful consideration of structural …
-
UKAEA-STEP-PR(24)192023
SOLPS-ITER simulations performed on STEP CDN geometry with Ar, varying D2 fuelling location Fuelling location can be an actuator for impurity compression/enrichment Inner-midplane (IMP) fuelling enhanced Ar compression/enrichment by 1) driving main plasma outflow 2) increasing collision frequency and 3) lowering upstream temperature PFR+IMP fuel…
Showing 301 - 310 of 2581 UKAEA Paper Results