-
UKAEA-CCFE-CP(19)482019
An understanding of the plasma edge and divertor is essential for predicting the performance of next-step machines such as ITER. Transport codes used to study the divertor behaviour [1] employ atomic physics data in two applications. The first is to predict the power radiated by the fuel and impurity atoms, which is carried out as a post-processing…
-
UKAEA-CCFE-CP(19)352019
In high-performance, ITER baseline-scenario pulses (3MA/2.7T) in JET-ILW with high levels (~ 32 MW) of heating power, typically ~ 20-40% of the input power is radiated, predominantly by W impurities, which are sputtered from the divertor targets and reach the confined plasma. Sustained ELMy H-mode operation at such high heating power in JET-ILW req…
-
UKAEA-CCFE-PR(19)622019
The pedestal structure, ELM losses and linear MHD stability are analysed in a series of JET-ILW H and D type I ELMy H-mode plasmas. The pedestal pressure (pPED) is typically higher in D than in H at the same input power, with the difference mainly due to lower density in H than in D. At the same input power, the pedestal electron pres…
-
UKAEA-CCFE-PR(19)492019
EDGE2D-EIRENE (the ‘code’) simulations show that radial electric field, Er, in the near scrape-off layer (SOL) of tokamaks can have large variations leading to a strong local E´B shear greatly exceeding that in the core region. This was pointed out in simulations of JET plasmas with varying divertor geometry, where the magnetic conf…
-
UKAEA-CCFE-CP(19)172018
-
UKAEA-CCFE-CP(19)132018
Empirically-based power-balance calculations of the inter-ELM separatrix loss power are presented for JET pulses with both the carbon- (JET-C) and ITER-like (JET-ILW) walls, to facilitate comparisons with results of on-going, non-linear gyro-kinetic calculations of pedestal heat transport, e.g. as reported in [1]. These might be able to explain the…
-
UKAEA-CCFE-PR(18)32018
Recent studies have shown that on JET with the Be/W ITER-like wall (JET-ILW) in high beta discharges with high D2 gas rates the inter-ELM temperature pedestal growth is saturated half way through the ELM cycle, leading to plasmas with reduced confinement, and that the linear MHD stability of these pedestals is inconsistent with the Peeling-Ballooni…
-
CCFE-PR(17)132017
Future devices like JT-60SA, ITER and DEMO require quantitative predictions of pedestal density and temperature levels, as well as inter-ELM and ELM divertor heat fluxes, in order to improve global confinement capabilities while preventing divertor erosion/melting in the planning of future experiments. Such predictions can be obtained from dedicate…
-
CCFE-PR(15)442015
The effects of poloidal asymmetries and heated minority species are shown to be necessary to accurately describe heavy impurity transport in present experiments in JET and ASDEX Upgrade. Plasma rotation, or any small background electrostatic field in the plasma, such as that generated by anisotropic external heating can generate strong poloidal den…
-
CCFE-PR(15)312015
New experiments in 2013-2014 have investigated the physics responsible for the decrease in H-mode pedestal confinement observed in the initial phase of JET-ILW operation (2012 Experimental Campaigns). The effects of plasma triangularity, global beta and neutrals on pedestal confinement and stability have been investigated systematically. The stabil…
Showing 41 - 50 of 57 UKAEA Paper Results