-
UKAEA-CCFE-CP(20)942018
Edge localised modes (ELMs) are magneto-hydrodynamic (MHD) instabilities that drive filamentary plasma eruptions in high confinement tokamak discharges [1]. Gaining an improved understanding of ELMs is important [2]; in future fusion reactors such as ITER, ELM heat fluxes will need to be limited to ensure durability of divertor materials [3]. A …
-
UKAEA-CCFE-CP(20)722018
The spherical torus/tokamak (ST) is a potentially attractive configuration for narrowing scientific and technical gaps to a fusion demonstration power plant and as a more compact and/or modular fusion power source. Due to a reduced plasma surface area to volume ratio, the ST configuration offers the potential to access high power exhaust heat fl…
-
CLM P821965
-
CLM P751965
-
UKAEA-CCFE-PR(20)072019
ELM simulations for the MAST-U Super-X tokamak have been obtained, using the JOREK code. The JOREK visco-resistive MHD model has been used to obtain comparisons of divertor configurations. The simulations show a factor 10 decrease in the peak heat flux to the outer target of the Super-X in comparison to a conventional divertor configuration. A roll…
-
UKAEA-CCFE-CP(19)532019
During edge localised modes (ELMs) high heat fluxes are incident on divertor targets, which future fusion devices will not withstand [1]. A solution to reduce the heat fluxes could be the new Super-X divertor, which will be tested on the MAST-U tokamak. The divertor has an increased connection length, magnetic flux expansion and is designed to reta…
-
UKAEA-CCFE-PR(20)012019
Proton irradiation is often used as a proxy for neutron irradiation but the irradiated layer is typically
-
UKAEA-CCFE-CP(19)422019
Plasma detachment needs to be achieved in ITER [1] and future devices such as DEMO to dissipate most of the power in the Scrape-Off-Layer (SOL) and reduce the particle flux reaching the divertor targets. In order to enhance our capability to improve current, and design future tokamaks, we must improve our understanding of the relative effect on det…
-
UKAEA-CCFE-CP(19)402019
In magnetic confinement devices, boundary turbulence is responsible for transporting plasma and energy from the well-confined region towards the material surfaces where it can severely harm reactor relevant machines. It is therefore essential to develop a solid understanding of the mechanisms behind the transport in the edge of the plasma. Large fl…
-
UKAEA-CCFE-PR(19)782019
A new inversion technique is presented for the identification of plasma filaments in wide-angle visible camera data. Direct inversion of camera data onto a field aligned basis is a poorly conditioned problem which is overcome by breaking the analysis into a `psuedo-inversion’ step followed by a `point spread function correction’ step. Camera …
Showing 61 - 70 of 141 UKAEA Paper Results