-
UKAEA-CCFE-PR(23)052023
Predictions of material activity in commercial fusion conditions predominantly rely on computational methods, due to a lack of data on long-term e ects of high-energy neutron irradiation on structural steels. Consequently, this could result in a bias due to uncertainties in nu…
-
UKAEA-CCFE-PR(23)032023
Spherical tokamaks are key for the successful design of operating scenarios of future fusion reactors in the areas of divertor physics, neutral beam current drive and fast ion physics. MAST Upgrade, which has successfully concluded its first experimental campaign, was specifically designed to address the role of the radial gradient of the fast ion…
-
UKAEA-CCFE-CP(23)652022
The CHIMERA fusion technology test facility is currently under construction at the UK Atomic Energy Authority site in South Yorkshire, UK. With the completion of the engineering design, including the design of a component mock-up to be used in full system commissioning, this paper presents in detail the features and capabilities of the CHIMERA faci…
-
UKAEA-CCFE-CP(23)602022
Diamond’s intrinsic hardness, excellent thermal conductivity and low atomic number make it a highly promising candidate as a plasma facing material. However, as with the previously used graphite, concerns over tritium retention and resultant chemical etching have so far limited research interest in the use of synthetic diamond. In order to study …
-
UKAEA-CCFE-PR(23)1282022
Predictions of the impact of charge-exchange (CX) reactions on beam ions in the MAST Upgrade spherical tokamak have been compared to measurements carried out with a fission chamber (neutron fluxes) and a Fast Ion Deuterium-Alpha (FIDA) diagnostic. A simple model was developed to reconstruct the outer-midplane neutral density based on Thomson sca…
-
UKAEA-CCFE-CP(23)542022
Several Ion Cyclotron Resonance Heating (ICRH) schemes in DT plasma have been considered for the ITER reactor [1]. Most of these heating schemes are minority heating at fundamental frequency. In DT plasma, both reactants can also absorb RF power as majorities at fundamental n=1 or harmonic n=2 frequency. Understanding benefits of directly heatin…
-
UKAEA-CCFE-PR(23)1142022
This work applies the coupled JINTRAC and QuaLiKiz-neural-network (QLKNN) model on the ohmic current ramp-up phase of a JET D discharge. The chosen scenario exhibits a hollow Te profile attributed to core impurity accumulation, which is observed to worsen with the increasing fuel ion mass from D to T. A dynamic D simulation was validated, evolvi…
-
UKAEA-CCFE-PR(23)1132022
The Joint European Torus (JET) is operated with the ITER-Like Wall (JET-ILW): beryllium in the main chamber and tungsten in the divertor in order to replicate materials for ITER. It was present systematic and quantitative study of tritium retention in dust and divertor tiles of ILW by means of tritium imaging plate technique to assess tritium le…
-
UKAEA-CCFE-CP(23)502022
Global research programmes seeking to achieve a commercially viable model of a fusion power plant are being accelerated at an unprecedented rate. One critical element to the design and licensing is an accurate understanding of the radiation environment throughout the plant lifetime and subsequent decommissioning phase. The radiation field which res…
-
UKAEA-CCFE-CP(23)472022
A comprehensive L-H power threshold study of MAST data is presented, with a detailed categorisation of transition and intermediate behaviour and a comparison of the results to scaling laws. Preliminary studies into the ion and electron heat flux for transitions at different densities are introduced. The first results of an L-H transition study o…
Showing 111 - 120 of 438 UKAEA Paper Results