-
UKAEA-CCFE-CP(20)1212020
While current tokamak experiments are beginning to utilise real-time feedback control systems to manage the plasma exhaust, future tokamaks still require validation of theoretical models used to predict the threshold impurity concentration required to facilitate stationary divertor operation. This work exploits new spectroscopic measurements of …
-
2019
Data on erosion and melting of beryllium upper limiter tiles, so-called dump plates (DP), are presented for all three campaigns in the JET tokamak with the ITER-like wall. High-resolution images of the upper wall of JET show clear signs of flash melting on the ridge of the roof-shaped tiles. The melt layers move in the poloidal direction from the i…
-
2018
The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994–5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favou…
-
UKAEA-CCFE-CP(20)832018
The authors exposed a radiatively cooled, lithium-filled tantalum heat pipe (HP) to a hydrogen plasma in DIFFER’s linear plasma source Magnum PSI continuously for ~2 hours. The beam made a saddle-shaped footprint along the side of the inclined ~195-mm-long HP. During several steps with constant overall heat load, we tilted the HP to vary the peak…
-
UKAEA-CCFE-CP(20)762018
In 1998 Makhankov [1] described the concept of modular exchangeable plasma facing components (PFCs) based on liquid metal heat pipes which are radiatively cooled. Here we present results from recent experiments with a lithium filled tubular heat pipe owned by Sandia National Laboratories. The tantalum envelope (~20mm diameter by ~200mm long) was he…
-
UKAEA-CCFE-PR(20)642018
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
-
CLM P1181966
-
UKAEA-CCFE-PR(20)082019
The initial current ramp phase of JET hybrid plasmas is used to optimise the target q-profile for main heating to allow access to high beta and avoid MHD instabilities. Mixed protium-deuterium experiments, carried out at JET since the installation of the beryllium-tungsten wall, have shown that the q-profile evolution during this Ohmic phase varies…
-
UKAEA-CCFE-CP(19)332019
The initial Ohmic current ramp phase of JET hybrid plasmas, including a current ‘overshoot’ before the main heating, is used to optimise the q-profile shape to allow access to high β and avoid MHD instabilities [1]. Such hybrid plasmas have never been operated using tritium (T) or mixed deuterium-tritium (D-T) fuel. However, experiments with i…
-
UKAEA-CCFE-CP(19)232019
The Charge eXchange Recombination Spectroscopy diagnostic system on the ITER plasma core (CXRS core) will provide spatially resolved measurements of plasma parameters. The optical front-end is located in upper port 3 and the light of 460 nm to 665 nm is routed to spectrometers housed in the tritium building. This paper describes the layout of the o…
Showing 21 - 30 of 97 UKAEA Paper Results