-
UKAEA-CCFE-PR(24)2282024
This work presents a system upgrade of the High Resolution Thomson Scattering (HRTS) diagnostic on JET that allows it to measure low temperature (1 to 500 eV) plasma pre- and post-Thermal quench (TQ), which would help to further the understanding of the physics in SPI experiments. The upgrade was done by connecting optic fibres from the original…
-
UKAEA-CCFE-PR(24)2482023
This work describes the usage of Error Field Correction coil system [Barlow I. et al 2001 Fusion Eng. Des. 58-59 189], which is a set of 4 coils located external to the vessel of the JET device, with the aim of introducing non-axisymmetric n=1 magnetic field perturbations in various targeted plasma experiments. Besides being used to characterize…
-
UKAEA-CCFE-PR(23)1882022
In 2019, the JET-ILW was equipped with a Shattered Pellet Injector (SPI) system with a wide capability to allow studies on the efficacy of shattered pellets in reducing the electro-magnetic and the thermal loads during disruptions and the avoidance/suppression of the formation of runaway electrons. The fully commissioned system became operationa…
-
UKAEA-CCFE-CP(23)402022
Shattered pellet injection (SPI), with research started in recent years, is the current concept for the ITER disruption mitigation system (DMS) to prevent disruption-related damage. Compared with impurity SPI, pure deuterium (D2) SPI could contribute to runaway electron (RE) avoidance in ITER via a strong dilution cooling before the thermal quen…
-
UKAEA-CCFE-CP(21)072021
The disruption mitigation system at ITER will include four shattered pellet injectors (SPI), which will be dedicated to the mitigation of electro-magnetic loads (EML), thermal loads and the avoidance and suppression of runaway electrons. Recently the JETILW was equipped with an SPI with a wide capability. Specifically: pellet diameter d = [4.57, 8.…
-
UKAEA-CCFE-PR(20)642018
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
-
CCFE-PR(16)192016
ELM control may be essential to develop ITER scenarios with a reasonable lifetime of divertor components, whilst ELM pacing may be essential to develop stationary ITER scenarios with a tungsten divertor. Resonant magnetic perturbations (RMPs) have mitigated ELMs in high collisionality plasmas in JET. The efficacy of RMPs in mitigating the ELMs is f…
-
CCFE-PR(17)362015
Disruptions, the fast accidental losses of plasma current and stored energy in tokamaks, represent asignificant risk to the mechanical structure as well as the plasma facing components of reactor-scale fusion facilities like ITER. At JET, the tokamak experiment closest to ITER in terms of operating parameters and size, massive gas injection has bee…
-
2014
In order to preserve the integrity of large tokamaks such as ITER, the number of disruptions has to be limited. JET has operated previously with a low frequency of disruptions (i.e., disruption rate) of 3.4% [P. C. de Vries et al., Nucl. Fusion 51, 053018 (2011)]. The start of operations with the new full-metal ITER-like wall at JET showed a marked…
-
2014
Analytical results of a complete JET cryopump regeneration, including the nitrogen panel, follow- ing the first ITER-Like Wall campaign are presented along with the in-situ analyses of residual gas. H/D mixtures and impurities such as nitrogen and neon were injected during plasma operation in the vessel to study radiation cooling in the scrape-off-…
Showing 1 - 10 of 16 UKAEA Paper Results