-
UKAEA-CCFE-PR(20)922020
Raman spectroscopy has been used to identify defective bonding in neon and silicon ion irradiated single crystals of 6H-SiC. Observable differences exist in the CC bonding region corresponding to different defect structures for neon and silicon ion implantations. Evidence of oxidation during high temperature ion implantation is observed as C-O a…
-
UKAEA-CCFE-PR(20)912020
Ion implantation is widely used as a surrogate for neutron irradiation in the investigation of radiation damage on the properties of materials. Due to the small depth of damage, micromechanical methods must be used to extract material properties. In this work, nanoindentation has been applied to ion irradiated silicon carbide to extract radiatio…
-
UKAEA-CCFE-PR(20)862020
Focussed ion beam (FIB) milling can be used to reveal sub-surface fracture and deformation below indents in materials. However, evolution of residual stresses around the indent impression cause changes to the crack morphology during the FIB cross-sectioning procedure. Berkovich nanoindents in single crystal hexagonal (6H) silicon carbide cause r…
-
UKAEA-CCFE-CP(20)872019
Analyses of radiation fields resulting from a deuterium-tritium (DT) plasma in fusion devices is a critical input to the design and validation of many aspects of the reactor design, such as shielding, material lifetime and remote maintenance requirements/scheduling. Neutronics studies are performed using radiation transport codes such as MCNP, TRIP…
-
UKAEA-CCFE-PR(20)182019
It is demonstrated that tokamak plasma can be fuelled by pellets while simultaneously maintaining ELM suppression by external resonant magnetic perturbations (RMPs). Pellets are injected from vertical high field site and deposited at outer part of plasma cross section. Each pellet triggers benign MHD event followed by short lived ELM free phase. Th…
-
UKAEA-CCFE-PR(20)1292018
Typically applied to non-linear simulations of MHD instabilities relevant to magnetically confined fusion, the JOREK code was originally developed with a 2D grid composed of isoparametric bi-cubic Bezier finite elements, that are aligned to the magnetic equilibrium of tokamak plasmas. To improve the applicability of these simulations, the grid-gene…
-
UKAEA-CCFE-CP(20)762018
In 1998 Makhankov [1] described the concept of modular exchangeable plasma facing components (PFCs) based on liquid metal heat pipes which are radiatively cooled. Here we present results from recent experiments with a lithium filled tubular heat pipe owned by Sandia National Laboratories. The tantalum envelope (~20mm diameter by ~200mm long) was he…
-
UKAEA-CCFE-CP(19)392019
In the present work, global, three-dimensional edge plasma turbulence simulations of a MAST L-mode attached plasma discharge are presented. Our study is based on the drift-reduced Braginskii equations, solved with the STORM module of BOUT++ for realistic MAST parameters in disconnected lower double null configuration. The plasma profiles are evolve…
-
UKAEA-CCFE-CP(19)282019
A detailed cross-device investigation on the role of filamentary dynamics in high density regimes has been performed within the EUROfusion framework comparing ASDEX-Upgrade (AUG) and TCV tokamaks. Both devices have run density ramp experiments at different levels of plasma current, keeping toroidal field or q95 constant in order to disentangle the …
-
UKAEA-CCFE-CP(19)202019
Reducing the plasma power exhaust impacting on plasma facing components during steady state operation is one of the major design issues in future tokamaks such as ITER. Impurity seeding, e.g. with N, is one method of achieving this and has been used for a long time in tokamak research [1]. In this work we exploit a recently developed spectroscopic …
Showing 81 - 90 of 234 UKAEA Paper Results