-
UKAEA-CCFE-PR(24)2312024
The status of research and development on vanadium alloys and on their application as a structural material in the breeder blanket of a fusion power plant are reviewed. Emphasis has been placed on irradiation experiments and the effects of neutron and ion irradiation on the microstructure of the current reference alloy, V-4Cr-4Ti. The effects of a …
-
UKAEA-STEP-PR(24)142024
This theme issue collects together papers summarising the conceptual design of the Spherical Tokamak for Energy Production (STEP). In 2019, the UK government funded the first design stages of a prototype fusion powerplant based on a compact toroidal geometry, called STEP. The primary technical aims of STEP are to produce net energy, to be self-s…
-
UKAEA-CCFE-PR(26)4412023
The pre-thermal quench (pre-TQ) dynamics of a pure deuterium (D2) shattered pellet injection (SPI) into a 3 MA/7MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evolution of the measured density and radiated power. The simulations also identify the importance of t…
-
UKAEA-CCFE-CP(26)382023
A pedestal density prediction model based on combining the transport in the pedestal to an ionization model is used to predict the density profile of tokamak H-mode pedestals. The transport model combines stiff ETG turbulence, KBM turbulence based on critical pressure gradient and a small neoclassical transport. The ionization aspect of the mode…
-
UKAEA-CCFE-PR(24)2482023
This work describes the usage of Error Field Correction coil system [Barlow I. et al 2001 Fusion Eng. Des. 58-59 189], which is a set of 4 coils located external to the vessel of the JET device, with the aim of introducing non-axisymmetric n=1 magnetic field perturbations in various targeted plasma experiments. Besides being used to characterize…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-PR(23)1672023
A nonlinear 4-dimensional drift island theory derived in (Imada et al 2019 Nucl. Fusion 59 046016 and references therein) provides qualitative predictions of the plasma response to a stationary neoclassical tearing mode (NTM) magnetic island in a low beta, large aspect ratio tokamak plasma. (Dudkovskaia et al 2021 Plasma Phys. Control. Fusion 63 05…
-
UKAEA-CCFE-CP(23)622023
The UK National Nuclear Laboratory (NNL) has been developing its capability in high‑temperature water corrosion over the past years in collaboration with the University of Bristol, UK. As part of this work, studies have been undertaken on nuclear fusion‑specific material Eurofer‑97, a reduced activation ferritic‑martensitic steel. Eurofe…
-
UKAEA-CCFE-PR(23)1612023
Severe plasma transients such as disruptions will impose high magnitude, short duration thermal loads on the plasma-facing first wall of the EU’s DEMOnstration tokamak. Repeated over DEMO’s lifetime, these transients may cumulatively alter the microstructure of first wall structural materials, degrading their performance. The effects of repeate…
-
UKAEA-CCFE-PR(23)1192023
MAST Upgrade has just begun its second physics campaign. The set of magnetic probes used to diagnose the magnetic field and currents on MAST Upgrade are described, and their calibration procedures outlined including calculation of uncertainties. The arrays of installed instability diagnostics are described and the detection and diagnosis of a speci…
Showing 11 - 20 of 188 UKAEA Paper Results