-
UKAEA-CCFE-CP(20)1122020
Understanding of fuel retention and release processes from plasma facing components (PFCs) of ITER like wall materials is important from fundamental and technological aspects [1]. Detailed information about fuel retention and release characteristics in plasma facing components from JET will allow…
-
UKAEA-CCFE-CP(20)742020
Post mortem analysis shows that mid and high atomic number metallic impurities are present in deposits on JET plasma facing components with the highest amount of Ni and W, and therefore the largest sink, being found at the top of the inner divertor. Sources are defined as “continuous” or “specific”, in that “continuous” sources…
-
UKAEA-CCFE-PR(20)722020
Self-ion bombardment of pure tungsten with ion energies of 2 MeV is used to mimic the defects created by neutrons in a fusion reactor. Electron microscopy is used to characterize the microstructure of samples. Thermal Desorption Spectrometry (TDS) is performed on deuterium implanted samples in order to estimate deuterium inventory as function of…
-
2019
Data on erosion and melting of beryllium upper limiter tiles, so-called dump plates (DP), are presented for all three campaigns in the JET tokamak with the ITER-like wall. High-resolution images of the upper wall of JET show clear signs of flash melting on the ridge of the roof-shaped tiles. The melt layers move in the poloidal direction from the i…
-
UKAEA-CCFE-CP(20)842019
JET has now completed three operating periods, ILW1, ILW2 and ILW3, giving an opportunity to make comparisons between tiles exposed for single operating periods and also comparisons of tiles exposed for all three periods, ILW1-3 (2011-2016). In this contribution, a comprehensive overview of fuel retention and material erosion/deposition patterns…
-
2018
The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994–5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favou…
-
UKAEA-CCFE-PR(19)412019
A new facility to study the interaction of hydrogen isotopes with nuclear fusion relevant first wall materials, its retention and release, has been produced. The new facility allows implanting a range of gases into samples, including tritium. Accurate study of isotope effects, such as the isotopic exchange in damaged microstructure, has previously …
-
CCFE-PR(16)242016
Rotating collectors and quartz microbalances (QMBs) are used in JET to provide time-dependent measurements of erosion and deposition. Rotation of collector discs behind apertures allows recording of the long term evolution of deposition. QMBs measure mass change via the frequency deviations of vibrating quartz crystals. These diagnostics are used t…
-
CCFE-PR(16)232016
JET components are removed periodically for surface analysis to assess material migration and fuel retention. This paper describes issues related to handling JET components and procedures for preparing samples for analysis; in particular a newly developed procedure for cutting beryllium tiles is presented. Consideration is also given to the hazards…
-
CCFE-PR(15)322015
Results of the first dust survey in JET with the ITER - Like Wall (JET - ILW) are presented. The sampling was performed using adhesive stickers from the divertor tiles where the greatest material deposition was detected after the first JET - ILW campaign in 2011 - 2012. The emphasis was especially on metal particles (Be and W) with the aim to deter…
Showing 21 - 30 of 37 UKAEA Paper Results