-
CCFE-PR(16)802016
The Joint European Torus (JET) high resolution Thomson scattering (HRTS) system measures radial electron temperature and density profiles. One of the key capabilities of this diagnostic is measuring the steep pressure gradient, termed the pedestal, at the edge of JET plasmas. The pedestal is susceptible to limiting instabilities, such as Edge Local…
-
CCFE-PR(16)792016
At the tokamak Joint European Torus (JET), the electron cyclotron emission spectra in O-mode and X-mode polarisations are diagnosed simultaneous in absolute terms for several harmonics with two Martin-Puplett interferometers. From the second harmonic range in X-mode polarisation, the electron temperature profile can be deduced for the outboard side…
-
CCFE-PR(15)552015
Modelling of nuclide densities as a function of time within magnetic confinement fusion devices such as the JET, ITER and proposed DEMO tokamaks is performed using Monte-Carlo transport codes coupled with a Bateman equation solver. The generation of reaction rates occurs either through point-wise interpolation of energy dependent tracked particle …
-
CCFE-PR(17)302015
The traditional method for static strength assessment of structures uses elastic stresses computed along critical ligaments and then divided into categories depending on their nature e.g. bending/membrane and primary/secondary. More recently, highly realistic plastic simulations are possible using FE (finite elements) which offer useful advantages …
-
CCFE-PR(17)352015
The JET tokamak is unique amongst present fusion devices in its capability to operate at high plasma current, providing the closest plasma parameters to ITER. The physics benefits of high current operation have to be balanced against the risks to the integrity of the machine due to high force disruptions. The installation of the ITER-Like Wall (ILW…
-
CCFE-PR(17)392015
In normal operation the JET neutral beam injectors have the operating gas supplied to the ion source and the neutraliser. For tritium operation the gas is supplied to both the ion source and neutraliser at a point close to the earth grid (grid gas) due to the difficulty in producing a gas line with a secondary containment and a ceramic break fo…
-
CCFE-PR(17)232015
We describe the operational experience of the JET actively cooled duct liner and compare it with the previous inertially cooled duct. The paper discusses the initial conditioning of the duct liner during restart commissioning and subsequent high power performance. The new duct was conditioned in 48 plasma pulses during its first time commissioning …
-
CCFE-PR(17)252015
The JET Neutral Beam Injection (NBI) system is the most powerful neutral beam plasma heating system currently operating. Optical Interlocks were installed on the beam lines in 2011 for the JET Enhancement Project 2 (EP2), when the heating power was increased from 23 MW to 34 MW. JET NBI has two beam lines. Each has eight positive ion injectors oper…
-
CCFE-PR(17)282015
The JET flywheel generator converters have operated since 1983 and for over 85,000 pulses. Problems with this plant are discussed, including corrosion, unbalanced flow and arcing within the liquid resistors; starting difficulties on both machines; and failure of the plug-braking transformers at energisiation. In 2012/13 two sets of thrust bearing p…
-
CCFE-PR(15)052015
The aim of the Exhaust Detritiation System (EDS) of the JET Active Gas Handling System (AGHS) is to convert all Q-based species (Q2, Q-hydrocarbons) into Q2O (Q being indifferently H, D or T) which is then trapped on molecular sieve beds (MSB). Regenerating the saturated MSBs leads to the production of tritiated water which is stored in Briggs drum…
Showing 291 - 300 of 510 UKAEA Paper Results