-
UKAEA-CCFE-PR(23)1192023
MAST Upgrade has just begun its second physics campaign. The set of magnetic probes used to diagnose the magnetic field and currents on MAST Upgrade are described, and their calibration procedures outlined including calculation of uncertainties. The arrays of installed instability diagnostics are described and the detection and diagnosis of a speci…
-
UKAEA-CCFE-CP(23)022023
Understanding the plasma parameters that affect the scrape off layer (SOL) width is a key issue for future tokamaks as the power entering the SOL (of order 100 MW [1] in ITER) and the SOL width (of order millimetres [2]) determine the heat flux to the divertor surfaces. The Eich scaling [2] can be used to characterise the divertor heat flux prof…
-
UKAEA-CCFE-PR(23)112023
A prototype infrared video bolometer (IRVB) was succesfully deployed in MAST-U, the first deployment of such a diagnostic in spherical tokamaks. The IRVB was designed to study the radiation around the x-point and has the potential to return emissivity profiles of unprecedented spatial resolution. The system was fully characterised prior installatio…
-
UKAEA-CCFE-PR(23)042023
The High Field High Density Region (HFSFD) has been experimentally observed in both divertor and limiter tokamak devices. In order to numerically reproduced the HFSHD region in the limiter tokamak device J-TEXT, we first performed SOLPS-ITER simulations on the J-TEXT limiter tokamak with the activation of drifts, which is associated with the HFSHD …
-
UKAEA-CCFE-CP(25)032022
The UK Spherical Tokamak for Energy Production (STEP) program is currently progressing the conceptual engineering design of a Spherical Tokamak-based fusion reactor. The program includes a project concerned with design of the reactor breeding blanket. The objective of this work was to develop a low fidelity, integrated simulation approach to sup…
-
UKAEA-STEP-CP(24)022022
The UK’s Spherical Tokamak for Energy Production (STEP) reactor design program has recently taken the decision to use exclusively microwave-based heating and current drive (HCD) actuators for its reactor concepts. This is based on a detailed assessment considering all viable HCD concepts, covering the grid to plasma efficiency (), physics applica…
-
UKAEA-CCFE-PR(23)1282022
Predictions of the impact of charge-exchange (CX) reactions on beam ions in the MAST Upgrade spherical tokamak have been compared to measurements carried out with a fission chamber (neutron fluxes) and a Fast Ion Deuterium-Alpha (FIDA) diagnostic. A simple model was developed to reconstruct the outer-midplane neutral density based on Thomson sca…
-
UKAEA-STEP-CP(23)092022
The UK Spherical Tokamak for Energy Production (STEP) program is currently progressing the conceptual engineering design of a Spherical Tokamak-based fusion reactor. The program includes a project concerned with design of the reactor breeding blanket. The objective of this work was to develop a low fidelity, integrated simulation approach to sup…
-
UKAEA-CCFE-CP(23)442022
Due to their relatively higher Vbeam/VAlvén ratio, spherical tokamaks are ideal to investigate high-frequency modes such as Compressional Alfvén Eigenmodes (CAEs) and Global Alfvén Eigenmodes (GAEs), and so they have been previously studied in MAST [1, 2]. Besides, the recently installed scintillator-based Fast-Ion Loss …
-
UKAEA-STEP-CP(23)072022
With steady progress on ITER project and the design of DEMO, the international community is now entering an era in which fusion power on the grid could become a reality within the next 20 – 30 years. In this environment the UK has started the ambitious Spherical Tokamak for Energy Production (STEP) programme, aiming to develop a compact protot…
Showing 51 - 60 of 244 UKAEA Paper Results