-
UKAEA-CCFE-CP(25)252024
The integrated modelling tool JINTRAC [1] was recently updated and now has the unique capability of fully consistent treatment of Deuterium and Tritium in the whole plasma volume. In this work this is utilized with coupled core-SOL-divertor simulations performed for the ITER 15MA/5.3T DT Q=10 scenario. The work is built on previous simulations publ…
-
UKAEA-CCFE-PR(24)032024
To design a safe termination scenario for a burning ITER plasma is a challenge that requires extensive core plasma and divertor modelling. The presented work consists of coupled core/edge/SOL/divertor simulations, performed with the JINTRAC code, studying the Q=10 flat-top phase and exit phase of the ITER 15MA/5.3T DT scenario. The modelling uti…
-
UKAEA-CCFE-PR(25)2682023
In the initial stages of ITER operation, ELM mitigation systems need to be commissioned. This requires controlled flat-top operation in type-I ELMy H-mode regimes. Hydrogen or helium plasma discharges are used exclusively in these stages to ensure no production of neutrons from fusion reactions. With the expected higher L-H power threshold of hy…
-
UKAEA-CCFE-PR(22)572022
The LOCUST GPU code has been applied to study the fast-ion transport caused by resonant magnetic perturbations in the high-performance Q = 10 ITER baseline scenario. The computational speed of the code is used calculate the impact of the ITER ELM-control-coil system on neutral beam heating efficiency, as well as producing detailed predictions o…
-
UKAEA-CCFE-CP(23)282021
An important part of the ITER Research Plan [1] is the Pre-Fusion Power Operation (PFPO) phase, which includes demonstration of H-mode plasma operation and the commissioning of ELM control systems. However, since hydrogen or helium are the main ion species in PFPO plasmas, the L–H power threshold PL–H is expected to be cons…
-
UKAEA-CCFE-PR(21)772021
The optimum conditions for access to and sustainment of H-mode plasmas and their expected plasma parameters in the Pre-Fusion Power Operation 1 (PFPO-1) phase of the ITER Research Plan, where the additional plasma heating will be provided by 20 MW of Electron Cyclotron Heating (ECH), are assessed in order to identify key open R&D issues. The as…
-
UKAEA-CCFE-PR(21)772021
The optimum conditions for access and sustainment of H-mode plasmas and their expected plasma parameters in the Pre-Fusion Operation 1 (PFPO-1) phase of the ITER Research Plan, where the additional plasma heating will be provided by 20 MW of Electron Cyclotron Heating (ECH), are assessed. The assessment is performed on the basis of empirical and…
-
UKAEA-CCFE-PR(21)192021
A novel high-performance computing algorithm, developed in response to the next generation of computational challenges associated with burning plasma regimes in ITER-scale tokamak devices, has been tested and is described herein. LOCUST-GPU 2 The Lorentz-Orbit Code for Use in Stellarators and Tokamaks (LOCUST) is designed for computationally scal…
-
UKAEA-CCFE-CP(19)272018
The ability to describe the essential physics and technology elements needed to robustly simulate the operation of ITER is critical to being able to model the plasma scenarios that will run in ITER. In this paper, the Integrated Modelling & Analysis Suite (IMAS) is used to simulate the 15 MA DT baseline scenario operation, including a descripti…
-
UKAEA-CCFE-PR(19)052018
HALO (HAgis LOcust) solves the initial value Vlasov-Maxwell problem perturbatively for application to certain nonlinear wave-particle problems in tokamak plasmas. It uses the same basic approach as the HAGIS code (Pinches et al., 1998) for wave evolution but is built on the LOCUST-GPU full-orbit code (Akers et al., 2012) for the solution of the Ham…
Showing 1 - 10 of 39 UKAEA Paper Results