-
UKAEA-CCFE-PR(20)092019
Advancing our understanding of divertor plasma physics is limited by an inability to directly determine the plasma characteristics (density, temperature, etc) over the entire divertor cross-section. At best, diagnostics are able to measure ne and Te at isolated points. More commonly however, diagnostics only measure higher-level quantities (e.g. em…
-
UKAEA-CCFE-CP(25)172018
Recent results from MAST address key physics issues for ITER operations and the design of future devices, by advancing our understanding of through analysis of high-resolution data and numerical modelling. Modelling of the interaction between filaments with BOUT++ indicates filaments separated by more than 5x their width move independently, and …
-
UKAEA-CCFE-CP(20)982018
-
UKAEA-CCFE-CP(20)722018
The spherical torus/tokamak (ST) is a potentially attractive configuration for narrowing scientific and technical gaps to a fusion demonstration power plant and as a more compact and/or modular fusion power source. Due to a reduced plasma surface area to volume ratio, the ST configuration offers the potential to access high power exhaust heat fl…
-
CLM P821965
-
CLM P751965
-
UKAEA-CCFE-CP(19)422019
Plasma detachment needs to be achieved in ITER [1] and future devices such as DEMO to dissipate most of the power in the Scrape-Off-Layer (SOL) and reduce the particle flux reaching the divertor targets. In order to enhance our capability to improve current, and design future tokamaks, we must improve our understanding of the relative effect on det…
-
UKAEA-CCFE-CP(19)402019
In magnetic confinement devices, boundary turbulence is responsible for transporting plasma and energy from the well-confined region towards the material surfaces where it can severely harm reactor relevant machines. It is therefore essential to develop a solid understanding of the mechanisms behind the transport in the edge of the plasma. Large fl…
-
UKAEA-CCFE-PR(19)782019
A new inversion technique is presented for the identification of plasma filaments in wide-angle visible camera data. Direct inversion of camera data onto a field aligned basis is a poorly conditioned problem which is overcome by breaking the analysis into a `psuedo-inversion’ step followed by a `point spread function correction’ step. Camera …
-
UKAEA-CCFE-CP(19)202019
Reducing the plasma power exhaust impacting on plasma facing components during steady state operation is one of the major design issues in future tokamaks such as ITER. Impurity seeding, e.g. with N, is one method of achieving this and has been used for a long time in tokamak research [1]. In this work we exploit a recently developed spectroscopic …
Showing 31 - 40 of 90 UKAEA Paper Results