-
UKAEA-CCFE-CP(25)042023
2021 has culminated with the completion of the JET-ILW DTE2 experimental campaign. This contribution summarizes Ion Cyclotron Resonance Heating (ICRH) operations from system and physics point of view. Improvements to the (ICRH) system, to operation procedures and to real time RF power control were implemented to address specific constraints from…
-
UKAEA-CCFE-PR(25)2682023
In the initial stages of ITER operation, ELM mitigation systems need to be commissioned. This requires controlled flat-top operation in type-I ELMy H-mode regimes. Hydrogen or helium plasma discharges are used exclusively in these stages to ensure no production of neutrons from fusion reactions. With the expected higher L-H power threshold of hy…
-
UKAEA-STEP-PR(25)272023
Electron Bernstein current drive (EBCD) systems are sensitive to plasma and launch conditions, and therefore require large parametric scans to optimise their design. One particular bottleneck in the simulation workflow is quasilinear modelling of current drive efficiency. Linear adjoint models are an attractive alternative, offering a ∼103× spee…
-
UKAEA-CCFE-CP(24)142023
Accurate quantification of the power loss channels and overall power balance of the plasma is essential for the safe operation of current and future fusion devices. The relative magnitudes of core radiation, SOL radiation and divertor target heat loading are determining factors in both PFC design and plasma scenario design in the successful real…
-
UKAEA-CCFE-PR(24)2472023
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challeng…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-PR(24)2452023
2021 JET experimental campaign has produced high stationary fusion power with 50%D 50%T discharges, operated with the ITER-relevant conditions i.e. operation with the baseline or hybrid scenario in the full metallic wall. It has provided a unique opportunity to assess the DT fusion power prediction capability before ITER DT experiments. This pap…
-
UKAEA-CCFE-PR(24)2202023
Spherical tokamaks (STs) have many desirable features that make them an attractive choice for a future fusion power plant. Power plant viability is intrinsically related to plasma heat and particle confinement and this is often determined by the level of micro-instability driven turbulence. Accurate calculation of the properties of turbulent micro-…
-
UKAEA-CCFE-CP(24)042023
A new bolometer camera was installed in the upper divertor chamber of MAST Upgrade between the MU01 and MU02 physics campaigns. Sharing viewing geometry with the existing lower divertor horizontal bolometer camera, this enables direct comparison of the radiated power in the two divert…
-
UKAEA-STEP-PR(24)012023
Showing 51 - 60 of 500 UKAEA Paper Results