-
UKAEA-CCFE-CP(18)032018
Recent results from MAST address key physics issues for ITER operations and the design of future devices, by advancing our understanding of through analysis of high-resolution data and numerical modelling. Modelling of the interaction between filaments with BOUT++ indicates filaments separated by more than 5x their width move independently, and …
-
UKAEA-CCFE-PR(19)072018
Ray-tracing techniques are applied to divertor filtered imaging, a diagnostic that has long been plagued by polluting reflected light features in metal walled fusion machines. A physically realistic surface reflection model is developed from a Cook-Torrence microfacet BRDF model. Camera calibration images of in-vessel point lights at JET are use…
-
UKAEA-CCFE-PR(18)822018
Recent experiments on TCV have made significant progress toward partial detachment of the outer divertor in neutral beam heated H-mode plasmas. The heating power required to enter H-mode was measured in a range of divertor configurations, finding that, in the vicinity of the PL-H/ne curve, the threshold power is largely independent of the poloidal …
-
UKAEA-CCFE-PR(19)032018
A new 1D divertor plasma code, SD1D, has been used to examine the role of recombination, radiation, and momentum exchange in detachment. Neither momentum or power losses by themselves are found to be sufficient to produce target ion flux rollover in detachment; radiative power losses are required to a) limit and reduce the ionization source and …
-
UKAEA-CCFE-PR(18)362018
This paper further analyses the EDGE2D-EIRENE simulations presented by [Chankin et al (2017 Nucl. Mater. Energy 12 273], of L-mode JET plasmas in vertical-vertical (VV) and vertical-horizontal (VH) divertor configurations. As expected, the simulated outer divertor ionisation source peaks near the separatrix in VV …
-
UKAEA-CCFE-PR(18)342018
Tangentially viewing fast camera footage of the low-field side snowflake minus divertor in TCV is analysed across a four point scan in which the proximity of the two X-points is varied systematically. The apparent flow observed in the post-processed movie shows two distinct regions of the camera frame exhibiting differing flow patterns. One flow in…
-
UKAEA-CCFE-PR(18)232018
Ray-tracing techniques are applied to bolometry, a diagnostic particularly sensitive to machine geometry due to the effect of volume sampling. Sightlines from the ASDEX-Upgrade bolometer foils were ray-traced with a path tracing algorithm, where the optical path is represented by a statistical bundle of ray paths connecting the foil surface with th…
-
CCFE-PR(17)652017
Using high speed imaging of the divertor volume, the region close to the X-point in MAST is shown to be quiescent. This is confirmed by three different analysis techniques and the quiescent X-point region (QXR) spans from the separatrix to the N = 1.02 flux surface. Local reductions to the atomic density and effects associated with the camera vie…
-
CCFE-PR(17)752017
This paper presents the use of a novel modelling technique based around intermittent transport due to filament motion, to interpret experimental profile and fluctuation data in the scrape-off layer (SOL) of JET during the onset and evolution of a density profile shoulder. Three cases are studied at different points in a density ramp experiment wher…
-
CCFE-PR(17)582017
Methods for density control are of critical importance for future long pulse tokamaks. The EMC3-EIRENE code is being used to investigate the applicability of 3D non-axisymmetric fields for density control in standard and advanced divertor configurations in spherical tokamaks. Part of this effort is understanding Scrape Off layer (SOL) transport mec…
Showing 41 - 50 of 89 UKAEA Paper Results