-
UKAEA-CCFE-PR(25)3982024
Notched small punch test (SPT) specimens with different types of notches have been adopted by many researchers to understand the fracture parameters of materials. However the specimen geometries have not been standardized and the effects of notch type on mechanical properties, failure mechanisms, and stress state of the tested materials need to be …
-
UKAEA-CCFE-PR(25)3632024
The extreme working conditions of the in-vessel components in nuclear fusion reactors require remote laser-welding for maintenance. However, this process induces heterogeneous residual stress, which can interact with microstructures, degrading mechanical properties. Involving the high-temperature operating environmen…
-
UKAEA-CCFE-PR(25)3532024
The separation of lithium and the fractionation of the isotopes by solvent extraction was studied, using benzo-15-crown-5 as an extractant dissolved in a diluent of an ionic liquid and anisole. Equilibrium experiments were carried out in stirred vessels while continuous flow experiments were performed in small channels with 0.5 mm diameter. In the …
-
UKAEA-CCFE-PR(24)2702024
Plasma turbulence on disparate spatial and temporal scales plays a key role in defining the level of confinement achievable in tokamaks, with the development of reduced numerical models for cross-scale turbulence effects informed by experimental measurements an essential step. MAST-U is a well-equipped facility having instruments to measure ion …
-
UKAEA-STEP-PR(24)182024
This paper presents a comprehensive overview of the preliminary divertor design and plasma exhaust scenario for the reactor-class Spherical Tokamak for Energy Production (STEP) project. Due to the smaller size of the machine, with a major radius less than half that of most DEMO concepts, the current design features a double-null divertor geometr…
-
UKAEA-CCFE-PR(25)3962023
As well as having suitable mechanical performance, fusion reactor materials for the first wall and blanket must be both radiation tolerant and low activation, which has resulted in the development of reduced activation ferritic/martensitic (RAFM) steels. The current steels suffer irradiation-induced hardening and embrittlement,…
-
UKAEA-CCFE-PR(25)3432023
-
UKAEA-CCFE-PR(25)2902023
The augmentation of mechanical properties of reduced activation ferritic martensitic steels through the introduction of creep resistant nano-oxide particles produces a class of oxide dispersion strengthened steels, which have attracted significant interest as candidates for first wall supporting structural materials in future nuclear fusion reac…
-
UKAEA-CCFE-PR(25)2842023
Nuclear fusion is a potential source of electricity which can address the environmental problems posed by fossil fuels. Eurofer97 steel is a primary structural material for breeding blanket and divertorcomponents in fusion Tokamaks.. Assembling and maintaining the structural integrity of these in-vessel components requires remote joint technique…
-
UKAEA-CCFE-PR(24)2512023
The injection of energetic neutral particles into the plasma of magnetic confinement fusion reactors is a widely-accepted method for heating such plasmas; various types of neutral beam are also used for diagnostic purposes. Accurate atomic data are required to properly model beam penetration into the plasma and to interpret photoemission spectra…
Showing 1 - 10 of 72 UKAEA Paper Results