-
CCFE-PR(15)112015
Sustained Edge Localised Mode (ELM) mitigation has been achieved on MAST and AUG using RMPs with various toroidal mode numbers over a wide range of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have been reduced. The ELM mitigation phase is typically associated with a drop in plasma density…
-
CCFE-PR(15)032015
The fuelling of plasmas by shallow frozen pellets with simultaneous mitigation of edge- localised modes (ELM) by external magnetic perturbation is demonstrated on the MAST tokamak. In these plasmas post-pellet particle loss is dominated by ELMs. It is shown that the size of post-pellet ELMs can be controlled by external magnetic perturbations. Post…
-
CCFE-PR(15)1142015
The linear and quasi-linear plasma response to the n = 3 and n = 4 (n is the toroidal mode number) resonant magnetic perturbation (RMP) fields, produced by the in-vessel edge localized mode control coils, is numerically studied for an ITER 15MA H-mode baseline Scenario. Both single fluid and fluid-kinetic hybrid models are used. The inclusion of dr…
-
2015
A low temperature jet impingement based heat sink module has been developed for potential application in a near-term fusion power plant divertor. The design is composed of a number of hexagonal CuCrZrsheets bonded together in a stack to form a laminate structure. This method allows the production ofcomplex flow paths using relatively simple manufac…
-
2015
The Joint European Torus (JET, Culham, UK) is the largest tokamak in the world. JET has been upgraded over the years and recently it has also become a test facility of the components designed for ITER, the next step fusion machine under construction in Cadarache (France). At JET, the neutron emission profile of Deuterium (D) or Deuterium-Tritium (D…
-
CCFE-PR(15)212015
Selected Ion Beam Analysis techniques applicable for detecting deuterium and heavier impurities have been used in the post-mortem analyses of tiles removed after the first JET ITER-Like Wall (JET-ILW) campaign. Over half of the retained fuel was measured in the divertor region. The highest figures for fuel retention were obtained from regions with …
-
CCFE-PR(15)202015
Edge-localised modes (ELMs) can carry significant fractions of their energy as far as main chamber plasma-facing components in divertor tokamaks. Since in future devices (e.g. ITER, DEMO) these energies could cause issues for material lifetime and impurity production, the energy and temperature of ions in ELMs needs to be investigated. In MAST, nov…
-
CCFE-PR(15)192015
Rotating collectors are used in JET to provide time-resolved measurements of erosion and redeposition of vessel materials. The silicon collecting disks rotate behind an aperture, driven by pulsing of the toroidal magnetic field, with the deposits analysed ex-situ by Nuclear Reaction Analysis. The angular dependence of deposition is mapped to discha…
-
CCFE-PR(15)172015
Measurements of intensity fluctuation of light emission within the divertor volume of MAST provide strong evidence for the existence of filamentary structures within the private flux region (PFR). These filaments are observed in L-mode and H-mode confinement regimes. Correlation analysis of the camera data supports the hypothesis that the filaments…
-
CCFE-PR(15)012015
As nuclear fusion progresses towards a sustainable energy source and the power of tokamak devices increases, a greater understanding of the radiation fields will be required. As well as on-load radiation fields, off-load or shutdown radiation field are an important consideration for the safety and economic viability of a commercial fusion reactor. …
Showing 231 - 240 of 507 UKAEA Paper Results