-
UKAEA-CCFE-CP(25)192018
Unraveling the conditions that permit access to H-mode continues to be an unresolved physics issue for tokamaks, and accurate extrapolations are important for planning ITER operations and DEMO design constraints. Experiments have been performed in JET, with the ITER-like W/Be wall, to increase the confidence of predictions for the L-H transition po…
-
2018
The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994–5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favou…
-
UKAEA-CCFE-CP(20)982018
-
UKAEA-CCFE-PR(20)1292018
Typically applied to non-linear simulations of MHD instabilities relevant to magnetically confined fusion, the JOREK code was originally developed with a 2D grid composed of isoparametric bi-cubic Bezier finite elements, that are aligned to the magnetic equilibrium of tokamak plasmas. To improve the applicability of these simulations, the grid-gene…
-
UKAEA-CCFE-PR(20)1242018
NBI-heated L-mode plasmas have been obtained in JET with the Be/W ITER-like wall (JET-ILW) in H and D, with matched profiles of the dimensionless plasma parameters in the plasma core confinement region and same Ti/Te and Zeff. The achieved isotope identity indicates that the confinement scale invariance principle is satisfied in the core confine…
-
UKAEA-CCFE-CP(20)932018
In 2009-2011 so-called ITER-like wall was installed on JET tokamak, with beryllium limiters and tungsten divertor. Change of the plasma facing materials from carbon to metallic had a significant effect on plasma operations and confinement. Achieving steady plasma performance has become more challenging due to impurity accumulation [1], which has pu…
-
UKAEA-CCFE-CP(20)922018
Dimensionless identity experiments test the invariance of plasma physics to changes in the dimensional plasma parameters, e.g. ne and Te, when the dimensionless parameters are conserved [1] [2]. However, conditions at the plasma boundary, such as influx of neutral particles, may introduce additional physics. An isotope identit…
-
UKAEA-CCFE-CP(20)812018
The Alfvén Eigenmode Active Diagnostic system (AEAD) has undergone a major upgrade and redesign to provide a state of the art excitation and real-time detection system for JET. The new system consists of individual 4kW amplifiers for each of the six antennas, allowing for increased current, separate excitation and real time control of relative …
-
UKAEA-CCFE-PR(20)752018
The Gyrokinetic Toroidal Code (GTC) has been used to study Toroidal Alfven Eigenmodes (TAEs) in high-performance plasmas. Experiments performed at the Joint European Torus, where TAEs were driven by energetic particles arising from Neutral Beams, ion cyclotron resonant heating and resonantly excited by dedicated external antennas, have been simulat…
-
UKAEA-CCFE-PR(20)642018
The JET outboard divertor targets are the in-vessel components which receive the largest heat flux density. Surface delamination, radial cracks, and tie rod failures have been observed in the outboard tungsten-coated CFC tiles, while bulk tungsten special lamellas were intentionally melted in dedicated experiments. These different types of damag…
Showing 81 - 90 of 225 UKAEA Paper Results