-
UKAEA-CCFE-CP(19)062019
The next D-T campaign will push JET ITER-like Wall (IWL) to high divertor power and energy levels. During the 2016 campaign, the Strike Point (SP) sweeping permitted relevant H-mode scenarios without exceeding the temperature limits imposed by JET Operation Instructions (JOIs). In the subsequent shutdown, six outer divertor tungsten-coated 2D carbo…
-
UKAEA-CCFE-PR(19)622019
The pedestal structure, ELM losses and linear MHD stability are analysed in a series of JET-ILW H and D type I ELMy H-mode plasmas. The pedestal pressure (pPED) is typically higher in D than in H at the same input power, with the difference mainly due to lower density in H than in D. At the same input power, the pedestal electron pres…
-
UKAEA-CCFE-PR(19)592019
We perform a study of system-scale to gyro-radius scale electromagnetic modes in a pedestal-like equilibrium using a gyrokinetic code ORB5, and compare to the results of a local gyrokinetic code, GS2, and an MHD energy principle code, MISHKA. In the relevant large-system, short wavelength regime, good agreement between the gyrokinetic codes is foun…
-
UKAEA-CCFE-PR(19)582019
As part of our aim to develop a reactor design framework, we present here our solution for the optimisation of plasma equilibria and tokamak poloidal field systems. A 2-D, free boundary, ideal magneto-hydrodynamic plasma equilibrium solver is described. We use it within the BLUEPRINT reactor design framework to design the plasma equilibria and po…
-
UKAEA-CCFE-PR(19)562019
Linear elasticity theory predicts a divergent strain field at the dislocation core, resulting from the continuum approximation breaking down at the atomic scale. We introduce a minimum model that includes elastic interactions and discrete lattice periodicity, and derive a set of equations that treat the core of an edge dislocation from a solely geo…
-
UKAEA-CCFE-PR(19)522019
This work describes the behaviour of the global energy and particle confinement on JET observed in a massive database of H-mode plasmas covering almost whole lifetime of JET operations, both with carbon and metal wall. The analysis is focused on type I ELMy H-modes in stationary phases. It is shown that plasma density in that regime is determined m…
-
UKAEA-CCFE-PR(19)492019
EDGE2D-EIRENE (the ‘code’) simulations show that radial electric field, Er, in the near scrape-off layer (SOL) of tokamaks can have large variations leading to a strong local E´B shear greatly exceeding that in the core region. This was pointed out in simulations of JET plasmas with varying divertor geometry, where the magnetic conf…
-
UKAEA-CCFE-PR(19)472019
High bandwidth, high spatial resolution measurements of electron temperature, density and plasma potential are valuable for resolving turbulence in the boundary plasma of tokamaks. While conventional Langmuir probes can provide such measurements either their temporal or spatial resolution is limited: the former by the sweep rate necessary for obtai…
-
UKAEA-CCFE-PR(19)432019
Body-centered cubic metals and alloys irradiated by energetic particles form highly mobile prismatic dislocation loops with a/2 {111} -type Burgers vectors. We show how to simulate thermal diffusion of prismatic loops using a discrete dislocation dynamics approach that explicitly includes the stochastic forces associated with ambient thermal fluctu…
-
UKAEA-CCFE-PR(19)422019
High temperature, neutron irradiated single crystal tungsten, with a post irradiation composition of W-1.20±0.11at.%Re-0.11±0.05at.%Os-0.03±0.01at.%Ta was characterised using a combination of Atom Probe Tomography (APT) and Scanning Transmission Electron Microscopy (STEM). APT showed that within nanoscale clusters of Re/Os, the atomic density wa…
Showing 131 - 140 of 507 UKAEA Paper Results