-
UKAEA-CCFE-PR(22)332022
Screening of high-Z (W) impurities from the confined plasma by the temperature gradient at the hot edge pedestal of fusion-grade H-mode plasmas has been demonstrated for the first time in the JET-ILW tokamak. Through careful optimisation of the hybrid-scenario, deuterium plasmas with sufficient heating power (≳ 32MW), high enough ion temperature …
-
UKAEA-CCFE-PR(22)222022
Capacitive plasma pickup is a well-known and difficult problem for plasma-facing edge diagnostics. Ths problem must be addressed to ensure an accurate and robust interpretation of the real signal measurements versus noise. JET’s Faraday cup fast ion loss detector array is particularly prone to this issue and can be used as a …
-
UKAEA-CCFE-PR(22)092022
Experiments in ASDEX Upgrade (AUG) and JET with the ITER-like wall (JET-ILW) are performed to separate the pedestal and core contributions to confinement in H-modes with different main ion masses. A strong isotope mass dependence in the pedestal is found which is enhanced at high gas puffing. This is because the ELM type changes when going fro…
-
UKAEA-CCFE-CP(23)392021
A key aim of the 2021 JET deuterium-tritium (D-T) experiments was to demonstrate steady high fusion power (10-15MW) with the ITER-like Be/W first wall. Plasmas were developed using D, repeated with T to investigate and mitigate isotope effects, and run with D-T to maximise fusion power. Compared with high current (q95~3) ‘baseline’ plasmas, …
-
UKAEA-CCFE-PR(23)972021
The aim of this paper is to numerically study the influences of the impurities on the high power hybrid discharges in the JET ILW configuration in the DD and DT scenarios. Numerical simulations with the COREDIV code of hybrid discharges with 32MW auxiliary heating, 2.2MA plasma current and 2.8T toroidal magnetic field in the ITER-like wall (ILW)…
-
UKAEA-CCFE-PR(23)952021
The experimental observation of multiple oscillations likely associated with beta-induced Alfven eigenmodes with toroidal mode number n = 1, 2 during strong tearing activity in JET plasmas is reported in this work. It is found the frequencies of these oscillations range from 5 kHz to 20 kHz, being consistent with the low-frequency beta-induc…
-
UKAEA-CCFE-PR(20)1142020
Achieving high neutron yields in today’s fusion research relies on high power auxiliary heating in order to attain required core temperatures. This is usually achieved by means of high Neutral Beam (NB) and Radio Frequency (RF) power. Application of NB power is accompanied by production of fast beam ions and associated Beam-Target (BT) reactio…
-
UKAEA-CCFE-PR(20)1272019
The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict type I ELMy pedestals of a large database JET-ILW (ITER-like wall) at the similar accuracy as is obtained when the experimental global plasma b is used as input. The neutral penetration …
-
UKAEA-CCFE-PR(20)192019
A study of mixed hydrogen-deuterium H-mode plasmas has been carried out in JET-ILW to strengthen the physics basis for extrapolations to JET D-T operation and to support the development of strategies for isotope ratio control in future experiments. Variations of input power, gas fuelling and isotopic mixture were performed in H-mode plasmas of the…
-
UKAEA-CCFE-CP(20)1022018
The JET exploitation plan foresees D-T operations in 2019-2020. With respect to the first D-T campaign in 1998, when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall and will benefit from an extended and improved set of diagnostics and higher available additional heating power…
Showing 21 - 30 of 61 UKAEA Paper Results