-
UKAEA-CCFE-PR(22)332022
Screening of high-Z (W) impurities from the confined plasma by the temperature gradient at the hot edge pedestal of fusion-grade H-mode plasmas has been demonstrated for the first time in the JET-ILW tokamak. Through careful optimisation of the hybrid-scenario, deuterium plasmas with sufficient heating power (≳ 32MW), high enough ion temperature …
-
UKAEA-CCFE-PR(22)212022
This paper describes the development of electromagnetic plasma burn-through model. Full circuit equations describing the currents in solenoid, poloidal field coil, and toroidally conducting passive structure have been integrated into the differential equation system of the plasma energy and particle balances in DYON. This enables consistent calcula…
-
UKAEA-CCFE-CP(23)202021
Disruption prediction and avoidance is critical for ITER and reactor-scale tokamaks to maintain steady plasma operation and to avoid damage to device components. The present status and results from the disruption event characterization and forecasting (DECAF) research effort are shown. The DECAF paradigm is primarily physics-based and provides q…
-
UKAEA-CCFE-PR(21)352021
Sustained operation of high-performance, ITER-baseline scenario plasmas at the high levels of input power (~< 40MA) required to achieve ~ 15 MW of D-T fusion power in JET-ILW requires careful optimisation of the fuelling to avoid an unacceptable disruption rate due to excessive radiation, primarily from W impurities, which are sputter…
-
UKAEA-CCFE-PR(21)092021
Ion cyclotron emission (ICE) driven by perpendicular neutral beam-injected (NBI) deuterons, together with the distinctive ICE driven by tangential NBI, have been observed from heliotron-stellarator plasmas in the Large Helical Device (LHD). Radio frequency radiation in the lower hybrid range has also been observed, with frequency dependent on plasm…
-
UKAEA-CCFE-CP(20)992020
Unraveling the conditions that permit access to H-mode continues to be an unresolved physics issue for tokamaks, and accurate extrapolations are important for planning ITER operations and DEMO design constraints. Experiments have been performed in JET, with the ITER-like W/Be wall, to increase the confidence of predictions for the L-H transition po…
-
UKAEA-CCFE-CP(20)1012020
Disruption prediction and avoidance is critical in ITER and reactor-scale tokamaks to maintain steady plasma operation and to avoid damage to device components. The present status and results from the physics-based disruption event characterization and forecasting (DECAF) research effort are shown for multiple tokamak devices. Present analysis of K…
-
UKAEA-CCFE-PR(20)932020
Parametric dependencies of the linear stability of toroidal Alfven eigenmode (TAE) in the presence of neutral beam injection (NBI) are investigated to understand the beam drive and damping effect of TAEs in JET and KSTAR. It is found that the results depend on the drift orbit width of the beam-ions normalized to the characteristic mode widths. I…
-
UKAEA-CCFE-PR(19)792019
The exhaust (loss) power components due to ELMs, radiation and heat transport across the edge transport barrier (ETB) between ELMs are quantifed for H-mode plasmas in JET-C and JET-ILW to provide data for comparison with simulations of pedestal heat transport. In low-current, JET-ILW pulses with a low rate of gas fuelling, the pedestal heat tran…
-
UKAEA-CCFE-PR(20)672019
Disruption prediction and avoidance is a critical need for next-step tokamaks such as ITER. The Disruption Event Characterization and Forecasting Code (DECAF) is used to fully automate analysis of tokamak data to determine chains of events that lead to disruptions and to forecast their evolution allowing sufficient time for mitigation or full av…
Showing 11 - 20 of 40 UKAEA Paper Results