-
UKAEA-CCFE-PR(23)872020
The isotope dependence of plasma transport has a significant impact on the performance of future D-T experiments in JET and ITER and eventually on the fusion gain and economics of future reactors. In preparation for future D-T operation on JET, dedicated experiments and comprehensive transport analysis were performed in H, D and H-D mixed plasma…
-
UKAEA-CCFE-CP(20)992020
Unraveling the conditions that permit access to H-mode continues to be an unresolved physics issue for tokamaks, and accurate extrapolations are important for planning ITER operations and DEMO design constraints. Experiments have been performed in JET, with the ITER-like W/Be wall, to increase the confidence of predictions for the L-H transition po…
-
UKAEA-CCFE-CP(20)1232020
-
UKAEA-CCFE-CP(20)972020
Since 2010, an in-vessel calibration light source (ICLS) has been used periodically on JET to calibrate a range of diagnostics at UV, visible and IR wavelengths. During shutdowns, the ICLS (essentially an integrating sphere) is positioned within the vacuum vessel by the remote handling (RH) system. Following the 2013 run, several changes were made …
-
UKAEA-CCFE-PR(19)792019
The exhaust (loss) power components due to ELMs, radiation and heat transport across the edge transport barrier (ETB) between ELMs are quantifed for H-mode plasmas in JET-C and JET-ILW to provide data for comparison with simulations of pedestal heat transport. In low-current, JET-ILW pulses with a low rate of gas fuelling, the pedestal heat tran…
-
UKAEA-CCFE-PR(20)1272019
The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict type I ELMy pedestals of a large database JET-ILW (ITER-like wall) at the similar accuracy as is obtained when the experimental global plasma b is used as input. The neutral penetration …
-
UKAEA-CCFE-PR(20)192019
A study of mixed hydrogen-deuterium H-mode plasmas has been carried out in JET-ILW to strengthen the physics basis for extrapolations to JET D-T operation and to support the development of strategies for isotope ratio control in future experiments. Variations of input power, gas fuelling and isotopic mixture were performed in H-mode plasmas of the…
-
UKAEA-CCFE-CP(25)192018
Unraveling the conditions that permit access to H-mode continues to be an unresolved physics issue for tokamaks, and accurate extrapolations are important for planning ITER operations and DEMO design constraints. Experiments have been performed in JET, with the ITER-like W/Be wall, to increase the confidence of predictions for the L-H transition po…
-
UKAEA-CCFE-PR(20)1242018
NBI-heated L-mode plasmas have been obtained in JET with the Be/W ITER-like wall (JET-ILW) in H and D, with matched profiles of the dimensionless plasma parameters in the plasma core confinement region and same Ti/Te and Zeff. The achieved isotope identity indicates that the confinement scale invariance principle is satisfied in the core confine…
-
UKAEA-CCFE-CP(20)922018
Dimensionless identity experiments test the invariance of plasma physics to changes in the dimensional plasma parameters, e.g. ne and Te, when the dimensionless parameters are conserved [1] [2]. However, conditions at the plasma boundary, such as influx of neutral particles, may introduce additional physics. An isotope identit…
Showing 31 - 40 of 57 UKAEA Paper Results