-
UKAEA-STEP-PR(24)202024
Success of UKs STEP (Spherical Tokamak for Energy Production) programme [1] [2] [3] [4] requires a robust plasma control system. This system has to guide the plasma from initiation to the burning phase, maintain it there, producing the desired fusion power for the desired duration and then terminate the plasma safely. This has to be done in a chall…
-
UKAEA-CCFE-PR(24)2142024
In order to test the capability of the full electromagnetic DYON to predict the plasma initiation feasibility of individual discharges and thus the operating space in the device, a dedicated experimental database was built in MAST-U by scanning the prefilled gas pressure $p_0$ and the induced loop voltage $V_{loop}$ (3 failed breakdown discharge…
-
UKAEA-CCFE-PR(24)2472023
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challeng…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-PR(24)2452023
2021 JET experimental campaign has produced high stationary fusion power with 50%D 50%T discharges, operated with the ITER-relevant conditions i.e. operation with the baseline or hybrid scenario in the full metallic wall. It has provided a unique opportunity to assess the DT fusion power prediction capability before ITER DT experiments. This pap…
-
UKAEA-CCFE-PR(24)2202023
Spherical tokamaks (STs) have many desirable features that make them an attractive choice for a future fusion power plant. Power plant viability is intrinsically related to plasma heat and particle confinement and this is often determined by the level of micro-instability driven turbulence. Accurate calculation of the properties of turbulent micro-…
-
UKAEA-CCFE-PR(23)1792023
-
UKAEA-CCFE-PR(23)1212023
In the paper we present an overview of interpretive modelling of a database of JET-ILW 2021 D-T discharges using the TRANSP code. Our main aim is to assess our capability of computationally reproducing the fusion performance of various D-T plasma scenarios using different external heating and D-T mixtures, and understand the performance driving mec…
-
UKAEA-CCFE-PR(23)1142022
This work applies the coupled JINTRAC and QuaLiKiz-neural-network (QLKNN) model on the ohmic current ramp-up phase of a JET D discharge. The chosen scenario exhibits a hollow Te profile attributed to core impurity accumulation, which is observed to worsen with the increasing fuel ion mass from D to T. A dynamic D simulation was validated, evolvi…
-
UKAEA-STEP-PR(23)052022
In this paper we present optimized actuator trajectories, evolving in time and space, of non-inductive ramp-up scenarios for the Spherical Tokamak for Energy Production (STEP). These trajectories are computed by solving a non-linear, multi-objective, constrained, finite-time optimal control problem. A method unique to STEP ramp-up studies that prov…
Showing 1 - 10 of 49 UKAEA Paper Results