-
UKAEA-CCFE-PR(23)1702023
Neutral Beam Injection (NBI) is a flexible auxiliary heating method for tokamak plasmas, capable of being efficiently coupled to the various plasma configurations required in the Tritium and mixed DeuteriumTritium Experimental campaign (DTE2) on the JET device. High NBI power was required for high fusion yield and alpha particle studies and to …
-
UKAEA-CCFE-PR(23)1292023
The Joint European Torus recently carried out an experimental campaign using a plasma consisting of both deuterium (D) and tritium (T). We observed a high-frequency mode using a reflectometer and an interferometer in a D-T plasma heated with low power neutral beam injection, PNBI = 11.6MW. This mode was observed at a frequency f = 156kHz and was lo…
-
UKAEA-CCFE-PR(23)1252023
In JET deuterium-tritium (D-T) plasmas, the fusion power is produced through thermonuclear reactions and reactions between thermal ions and fast particles generated by neutral beam injection (NBI) heating or accelerated by electromagnetic wave heating in the ion cyclotron range of frequencies (ICRF). To complement the experiments with 50/50 D/T …
-
UKAEA-CCFE-PR(23)1152023
This article starts with a brief description of two new viewing systems with a light path which crosses the biological shield wall and are compatible with Deuterium-Tritium (D-T) operations in JET. However, it focuses on the optical modelling and engineering design of one of them which is a multiple camera system producing a wide angle view (WAV)…
-
UKAEA-CCFE-PR(23)092023
Following from the paper describing the remote wide angle viewing system compatible with Deuterium-Tritium operations. This is the second article describing a second remote line of sight, this time focusing on the imaging of the divertor region in JET. It explains in detail the optical and engineering designs of constructing an optical relay which …
-
UKAEA-CCFE-PR(22)312022
Unusually high power loads on the Beryllium limiter caused by Neutral Beam re-ionisation, and much cooler divertor target surfaces were observed during the recent JET tritium campaign. As both phenomena are driven by scrape-off layer (SOL) physics, the SOL features of 72 tritium H-mode discharges and their deuterium references have been studied. …
-
UKAEA-CCFE-CP(23)302021
Many of the essential data analysis procedures for a tokamak experiment rely on the knowledge of the magnetic field structure obtained from MHD force balance. On JET, the code that is responsible for computing the magnetic equilibrium is called EFIT++. Interpretation of JET data has been challenging due to inconsistencies between diagnostic meas…
-
UKAEA-CCFE-PR(21)472021
Visible emission from a broad range of tungsten charge states has complicated plasma ion temperature and toroidal rotation measurements on the JET tokamak since the installation of the ITER-like wall. A plethora of charge exchange emission lines from ions up to W 56+ and 21 suspected magnetic dipole emission lines have so far been observed. In p…
-
UKAEA-CCFE-PR(21)322021
For the first time, a digital Mirror Langmuir probe (MLP) has successfully
-
UKAEA-CCFE-PR(21)262021
The first divertor was installed in the JET machine between 1992 and 1994 and was operated with carbon tiles and then beryllium tiles in 1994-5. Post-mortem studies after these first experiments demonstrated that most of the impurities deposited in the divertor originate in the main chamber, and that asymmetric deposition patterns generally favouri…
Showing 11 - 20 of 97 UKAEA Paper Results