-
UKAEA-CCFE-PR(24)2562024
An absolutely calibrated, visible imaging diagnostic has been deployed on the MAST spherical tokamak. Two sets of three colour channels are defined using a combination of stacked multi-cavity interference filters, colour-glass filter and a colour-pixel sensor. The system is compact with a single viewing pupil which facilitates unambiguous compariso…
-
UKAEA-STEP-PR(24)182024
This paper presents a comprehensive overview of the preliminary divertor design and plasma exhaust scenario for the reactor-class Spherical Tokamak for Energy Production (STEP) project. Due to the smaller size of the machine, with a major radius less than half that of most DEMO concepts, the current design features a double-null divertor geometr…
-
UKAEA-CCFE-PR(24)2142024
In order to test the capability of the full electromagnetic DYON to predict the plasma initiation feasibility of individual discharges and thus the operating space in the device, a dedicated experimental database was built in MAST-U by scanning the prefilled gas pressure $p_0$ and the induced loop voltage $V_{loop}$ (3 failed breakdown discharge…
-
UKAEA-STEP-PR(26)032023
Introduction of cross-field drifts in SOLPS-ITER simulations of connected double-null plasmas in STEP with the ion ∇B × B drift towards the upper divertors was found to enhance the detachment of the inner divertors with decreased target densities and ion and heat fluxes, while simultaneously complicating the access to detachment in the outer low…
-
UKAEA-CCFE-CP(25)282023
MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), external sources of super-Alfvénic fast-ions that provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in burning plasmas. Clear evidence of fast-ion redistribution and loss due to sawteeth (ST), fishbones (FB), long-liv…
-
UKAEA-CCFE-CP(25)152023
Reduced plasma models play a pivotal role in swiftly interpreting experiments, exploring different reactor design points, and providing consistency checks for high-fidelity simulations. This presentation focuses on reduced models for plasma detachment onset and transient reattachment timescales, assessing their validity across ASDEX Upgrade, JET…
-
UKAEA-CCFE-PR(25)2892023
This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to …
-
UKAEA-CCFE-CP(24)142023
Accurate quantification of the power loss channels and overall power balance of the plasma is essential for the safe operation of current and future fusion devices. The relative magnitudes of core radiation, SOL radiation and divertor target heat loading are determining factors in both PFC design and plasma scenario design in the successful real…
-
UKAEA-STEP-PR(24)192023
SOLPS-ITER simulations performed on STEP CDN geometry with Ar, varying D2 fuelling location Fuelling location can be an actuator for impurity compression/enrichment Inner-midplane (IMP) fuelling enhanced Ar compression/enrichment by 1) driving main plasma outflow 2) increasing collision frequency and 3) lowering upstream temperature PFR+IMP fuel…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
Showing 11 - 20 of 47 UKAEA Paper Results