-
UKAEA-STEP-PR(24)212024
The design, delivery, and operation of a large-scale infrastructure project is challenging at best. For the Spherical Tokamak for Energy Production (STEP) Prototype Powerplant (SPP), the challenges increase exponentially. In addition to being a large-scale infrastructure project, it is a cutting edge, first of a kind (FOAK) technology demonstrat…
-
UKAEA-CCFE-PR(24)2602024
New RAFM steels, with intragranular VN precipitates for enhanced creep strength, were irradiated with 2MeV Fe+ ions at 600oC to explore MX-type precipitate response to extreme end-of-life conditions in breeder blanket components. Utilizing TEM, Analytical-STEM, and APT, the steels were characterized in the unirradiated and irradiated …
-
UKAEA-CCFE-CP(26)422023
Spherical tokamaks show great potential in being the basis for a compact fusion power plant. With a reduced aspect ratio and the benefit of increased plasma performance, spherical tokamaks provide a pathway for tokamak electricity production with reduced capital costs compared to conventional aspect ratio tokamak power plant designs. The…
-
UKAEA-STEP-CP(24)042023
In 2019 the UK launched the STEP programme to design and build a prototype electricity producing nuclear fusion power plant, aiming to start operation around 2040. The plant should lay the foundation for the development of commercial nuclear fusion power plants. The design is based on the spherical tokamak principle, which opens a route to high pre…
-
UKAEA-CCFE-PR(23)1912023
ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs is contributing to the preparation of ITER scientific exploitation and operation and aspires to exploit ITER outcomes in view of DEMO. The paper provides …
-
UKAEA-STEP-PR(23)162023
During development of the UKAEA’S Spherical Tokamak for Energy Production (STEP), assessment of manufacturing strategies for the inboard shield identified several gaps in knowledge. Limits arose from the modularization of this component, geometric constraints of tungsten ceramic forming, joining with low-activation interlayers and dissimilar j…
-
UKAEA-CCFE-CP(23)622023
The UK National Nuclear Laboratory (NNL) has been developing its capability in high‑temperature water corrosion over the past years in collaboration with the University of Bristol, UK. As part of this work, studies have been undertaken on nuclear fusion‑specific material Eurofer‑97, a reduced activation ferritic‑martensitic steel. Eurofe…
-
UKAEA-CCFE-PR(23)1152023
This article starts with a brief description of two new viewing systems with a light path which crosses the biological shield wall and are compatible with Deuterium-Tritium (D-T) operations in JET. However, it focuses on the optical modelling and engineering design of one of them which is a multiple camera system producing a wide angle view (WAV)…
-
UKAEA-CCFE-CP(23)352021
Neutral Beam Injection (NBI) is a very flexible auxiliary heating method for tokamak plasmas, capable of being efficiently coupled to the various plasma configurations required in the Tritium and Deuterium–Tritium Experimental campaign (DTE2) to be undertaken in the JET device. In particular, experiments for high fusion yield and alpha particl…
-
UKAEA-CCFE-PR(21)232021
The work reported in this paper has already been presented internally by placement student Jacob Young at a MAST Physics and Technology meeting on December 17 2020. Therefore it does not require a paper review presentation. Please also note that the paper is proposed for inclusion in a special issue of Plasma Research Express linked to the recent I…
Showing 11 - 20 of 78 UKAEA Paper Results