-
UKAEA-CCFE-CP(23)122020
The planned high-profile experiments during 2020 at the Joint European Torus (JET), notably including a deuterium-tritium (DT) experimental phase, are expected to produce large neutron yields, in the region of 1021 neutrons. The scientific objectives are linked with a technology programme, WPJET3, to deliver the maximum scientific and…
-
UKAEA-CCFE-CP(23)112020
Dimensionless experiments test the invariance of plasma physics to changes in the dimensional plasma parameters, when the canonical dimensionless parameters are conserved [1], [2]. Isotope identity experiments exploit the change in isotope ion mass A = mi/mp to obtain plasmas with identical dimensionless profiles in the same tokamak. However, condi…
-
UKAEA-CCFE-CP(23)102020
In 2019 JET carried out a very successful Deuterium-Deuterium campaign, referred to as C38, producing a total of 3.751019 DD neutrons. During this campaign, a series of experiments were implemented to record the neutron fluence at positions close and far from the source and along shielding penetrations. Measurements were performed usi…
-
UKAEA-CCFE-PR(23)882020
The pellet cycle of a mixed isotope tokamak plasma is successfully reproduced with reduced turbulent transport modelling within an integrated simulation framework. In JET tokamak experiments, deuterium pellets with reactor-relevant deposition characteristics were injected into a pure hydrogen plasma. Measurements of the isotope ratio profile inf…
-
UKAEA-CCFE-PR(23)872020
The isotope dependence of plasma transport has a significant impact on the performance of future D-T experiments in JET and ITER and eventually on the fusion gain and economics of future reactors. In preparation for future D-T operation on JET, dedicated experiments and comprehensive transport analysis were performed in H, D and H-D mixed plasma…
-
UKAEA-CCFE-CP(21)092020
Understanding the effects of neutron irradiation of materials is one of the outstanding issues in the development of fusion technologies. The impact of this work derives from the opportunity, for the first time in a tokamak operating with a D-T plasma, to deliver experimental results which directly link to the nuclear characteristics of real sample…
-
2020
A robust impurity detection and tracking code, able to generate large sets of dust tracks from tokamak camera footage, is presented. This machine learning–based code is tested with cameras from the Joint European Torus, Doublet-III-D, and Magnum-PSI and is able to generate dust tracks with a 65–100% classification accuracy. Moreover, the number…
-
UKAEA-CCFE-CP(20)992020
Unraveling the conditions that permit access to H-mode continues to be an unresolved physics issue for tokamaks, and accurate extrapolations are important for planning ITER operations and DEMO design constraints. Experiments have been performed in JET, with the ITER-like W/Be wall, to increase the confidence of predictions for the L-H transition po…
-
UKAEA-CCFE-PR(20)1312020
This paper presents a dedicated study of plasma-antenna (PA) coupling with the Alfvén Eigenmode Active Diagnostic (AEAD) in JET. Stable AEs and their resonant frequencies f, damping rates < 0, and toroidal mode numbers n are measured for various PA separations and limiter versus X-point magnetic cofigurations. Two stable AEs are observed to be …
-
UKAEA-CCFE-CP(20)1122020
Understanding of fuel retention and release processes from plasma facing components (PFCs) of ITER like wall materials is important from fundamental and technological aspects [1]. Detailed information about fuel retention and release characteristics in plasma facing components from JET will allow…
Showing 61 - 70 of 229 UKAEA Paper Results