-
UKAEA-CCFE-PR(26)4722025
Alfven eigenmodes driven by positive energy gradients in the alpha particle distribution have been observed in JET deuterium-tritium hybrid JET pulses heated only by neutral beam injection. Coherent low frequency magnetic fluctuations were detected in D-T pulses, but were absent in pure D reference pulses, indicating that the modes were destabil…
-
UKAEA-CCFE-PR(25)3352025
The calibration of the JET x-ray spectrometer is presented. The absolute throughput, diffractor focussing and instrument function of the spectrometer is presented and the quality of the ion temperature measurement is re-assessed, particularly at the lower end. The addition of a second diffractor enables simultaneous measurements of the spectra …
-
UKAEA-CCFE-CP(25)142024
The typical pulse on the JET tokamak is ~10s during the main phase of the discharge, however long discharge operation (>30s) is possible with sufficient preparation and care. During the last period of JET operation in 2023 long pulses in deuterium plasmas were developed to assess the sustainment of the plasma performance over current resistive t…
-
UKAEA-CCFE-PR(25)2992024
Details of a 2-axis goniometer used with an x-ray source are presented, including measurements of double-crystal integrated reflectivity of diffractors used in spectrometers at JET. Polarization corrections of the measurements are calculated for estimates of the single-crystal integrated reflectivity. Synchronised parallel and dispersive diffracto…
-
UKAEA-CCFE-PR(24)2482023
This work describes the usage of Error Field Correction coil system [Barlow I. et al 2001 Fusion Eng. Des. 58-59 189], which is a set of 4 coils located external to the vessel of the JET device, with the aim of introducing non-axisymmetric n=1 magnetic field perturbations in various targeted plasma experiments. Besides being used to characterize…
-
UKAEA-CCFE-PR(24)2472023
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challeng…
-
UKAEA-CCFE-PR(23)1292023
The Joint European Torus recently carried out an experimental campaign using a plasma consisting of both deuterium (D) and tritium (T). We observed a high-frequency mode using a reflectometer and an interferometer in a D-T plasma heated with low power neutral beam injection, PNBI = 11.6MW. This mode was observed at a frequency f = 156kHz and was lo…
-
UKAEA-CCFE-PR(24)2412021
An intensive integrated modelling work of main scenarios of the new tokamak DTT (Divertor Tokamak Test facility) with the Single Null divertor configuration has been performed using first-principle quasi-linear transport models, in support to the design of the device and to the definition of its scientific work-programme. First results of this i…
-
UKAEA-CCFE-PR(23)1032021
This paper provides an overview of the status of the laser diagnostics to be implemented on ITER. This includes descriptions of the Thomson scattering in the Core, Edge and Divertor regions, polarimetry and interferometry diagnostics used for measuring plasma density and also measurements of Helium density in the divertor using Laser Induced Flo…
-
UKAEA-CCFE-CP(23)302021
Many of the essential data analysis procedures for a tokamak experiment rely on the knowledge of the magnetic field structure obtained from MHD force balance. On JET, the code that is responsible for computing the magnetic equilibrium is called EFIT++. Interpretation of JET data has been challenging due to inconsistencies between diagnostic meas…
Showing 1 - 10 of 67 UKAEA Paper Results