-
UKAEA-CCFE-PR(26)4722025
Alfven eigenmodes driven by positive energy gradients in the alpha particle distribution have been observed in JET deuterium-tritium hybrid JET pulses heated only by neutral beam injection. Coherent low frequency magnetic fluctuations were detected in D-T pulses, but were absent in pure D reference pulses, indicating that the modes were destabil…
-
UKAEA-CCFE-PR(25)3352025
The calibration of the JET x-ray spectrometer is presented. The absolute throughput, diffractor focussing and instrument function of the spectrometer is presented and the quality of the ion temperature measurement is re-assessed, particularly at the lower end. The addition of a second diffractor enables simultaneous measurements of the spectra …
-
2025
This work examines the separatrix and SOL characteristics in three scenarios on JET: the Quasi-Continuous Exhaust (QCE) regime, the core-edge-SOL integrated ITER Baseline scenario, and the X-point Radiator (XPR) regime. All three scenarios are potentially compatible with reactor operations, as they aim to provide power exhaust solutions through dif…
-
UKAEA-STEP-CP(26)012024
The Spherical Tokamak for Energy Production (STEP) programme aims to deliver a UK prototype fusion energy plant, targeting 2040, and a path to commercial viability of fusion. The conceptual design of such a prototype, meeting engineering and physics constraints, is complex due to the tight aspect ratio and limited space in compact spheri…
-
UKAEA-CCFE-CP(25)142024
The typical pulse on the JET tokamak is ~10s during the main phase of the discharge, however long discharge operation (>30s) is possible with sufficient preparation and care. During the last period of JET operation in 2023 long pulses in deuterium plasmas were developed to assess the sustainment of the plasma performance over current resistive t…
-
UKAEA-CCFE-PR(25)2992024
Details of a 2-axis goniometer used with an x-ray source are presented, including measurements of double-crystal integrated reflectivity of diffractors used in spectrometers at JET. Polarization corrections of the measurements are calculated for estimates of the single-crystal integrated reflectivity. Synchronised parallel and dispersive diffracto…
-
UKAEA-CCFE-PR(24)2362024
Inconel 625 is a nickel-chromium based super alloy used in the construction of the vacuum vessel of the Joint European Torus (JET) experimental fusion device. It was selected for its mechanical properties at elevated temperature, being exposed to vacuum baking at >300°C and heat loads of typically 0.5 MW/m2 for recessed areas of t…
-
UKAEA-CCFE-CP(25)292023
INTRODUCTION Future generation tokamaks, including ITER, will strive for better confinement, which means a higher fusion plasma current to achieve a good Fusion Efficiency Factor value greater than 10 [1]. One of the major threats with this scenario is a potential for increased damage of first wall components due to unmitig…
-
UKAEA-CCFE-PR(24)2482023
This work describes the usage of Error Field Correction coil system [Barlow I. et al 2001 Fusion Eng. Des. 58-59 189], which is a set of 4 coils located external to the vessel of the JET device, with the aim of introducing non-axisymmetric n=1 magnetic field perturbations in various targeted plasma experiments. Besides being used to characterize…
-
UKAEA-CCFE-PR(24)2472023
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challeng…
Showing 1 - 10 of 97 UKAEA Paper Results