-
UKAEA-CCFE-PR(25)2892023
This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to …
-
UKAEA-CCFE-PR(24)2252023
JET’s frequency-modulated continuous wave (FMCW) reflectometers have been operating well with the current design since 2005 and density profiles are being automatically calculated intershot since then. However, the calculated profiles had long suffered from several shortcomings – poor agreement with other diagnostics; sometimes inappropriate…
-
UKAEA-CCFE-PR(23)1822023
The reference ion cyclotron resonance frequency (ICRF) heating schemes for ITER deuterium-tritium (D-T) plasmas at the full magnetic field of 5.3 T are second harmonic heating of tritium and 3He minority heating. The wave-particle resonance location for these schemes coincide and are central at a wave frequency of 53 MHz at 5.3T [1]. Experiments ha…
-
UKAEA-CCFE-PR(23)1802023
-
UKAEA-CCFE-PR(23)1442023
A dataset of baseline DT plasmas with peripheral HFS fuelling pellets has been produced on JET, in order to mimic the situtation in ITER. During the pellet ablation phase prompt particle losses due to pellet triggered ELM can be detected. Regarding pellet deposition, the data indicate that plasmoids drift velocity might be smaller than predicted…
-
UKAEA-CCFE-CP(23)492022
JET’s frequency-modulated continuous-wave (FMCW) reflectometers have been operating well with the current design since 2005 and density profiles are being automatically calculated intershot since then[1]. However, the calculated profiles had long suffered from several shortcomings – poor agreement to other diagnostics; sometimes inappropriat…
-
UKAEA-CCFE-CP(23)612021
The relative role of particle transport and edge fuelling in setting the H-mode density pedestal is still a key open question [1]. Although reduced pedestal models have proven successful in predicting the pedestal pressure for a wide range of plasma scenarios [2,3,4], they lack a first principle based, predictive model for the edge density. Pred…
-
UKAEA-CCFE-CP(23)132021
JET has investigated one the key issues for the baseline scenario in ITER, the integration of a radiative divertor for heat load control with the use of neon and nitrogen as seed impurity. A characterization of the choice of the impurity seed on plasma confinement, neutrons, pedestal MHD stability, pedestal instabilities, core transport is given…
-
UKAEA-CCFE-CP(19)572019
All density profile reconstruction techniques for both O-mode and X-mode are based on the assumption that the cut-off frequency profile is monotonic. However, there are many sources of perturbations to the plasma that generate hollow areas in the cut-off frequency profile, breaking the aforementioned assumption. This causes a significant immediate …
-
UKAEA-CCFE-PR(19)332019
All density profile reconstruction techniques for both O-mode and X-mode are based on the assumption that the cut-off frequency profile is monotonic. However, there are many sources of perturbations to the plasma that generate hollow areas in the cut-off frequency profile, breaking the aforementioned assumption and causing a significant immediate r…
Showing 1 - 10 of 10 UKAEA Paper Results
Page 1 of 1