-
UKAEA-CCFE-CP(25)212024
Tritium inventory build-up is a safety issue for next step devices. JET brings a unique contribution on fuel retention and recovery in a metallic device, as it has operated both in deuterium (D) and deuterium-tritium (DT) plasmas. This paper will provide an overview of results from JET in this fi…
-
UKAEA-CCFE-PR(23)1912023
ITER is of key importance in the European fusion roadmap as it aims to prove the scientific and technological feasibility of fusion as a future energy source. The EUROfusion consortium of labs is contributing to the preparation of ITER scientific exploitation and operation and aspires to exploit ITER outcomes in view of DEMO. The paper provides …
-
UKAEA-CCFE-PR(23)1882022
In 2019, the JET-ILW was equipped with a Shattered Pellet Injector (SPI) system with a wide capability to allow studies on the efficacy of shattered pellets in reducing the electro-magnetic and the thermal loads during disruptions and the avoidance/suppression of the formation of runaway electrons. The fully commissioned system became operationa…
-
UKAEA-CCFE-CP(21)072021
The disruption mitigation system at ITER will include four shattered pellet injectors (SPI), which will be dedicated to the mitigation of electro-magnetic loads (EML), thermal loads and the avoidance and suppression of runaway electrons. Recently the JETILW was equipped with an SPI with a wide capability. Specifically: pellet diameter d = [4.57, 8.…
-
UKAEA-CCFE-PR(21)412021
Self-passivating Metal Alloys with Reduced Thermo-oxidation (SMART) are under development for the primary application as plasma-facing materials of the first wall in a fusion DEMOnstration power plant (DEMO). SMART materials must combine the suppressed oxidation in case of an accident and an acceptable plasma performance during the regular operatio…
-
UKAEA-CCFE-CP(20)1032020
One of the issues faced by future fusion devices will be high target heat loads. Alternative divertors are a potential solution to the heat loads. They have been investigated in TCV and DIII-D, and will be investigated on MAST-U. To evaluate their effectiveness, accurate target heat flux and power balance measurements are required in these machines…
-
UKAEA-CCFE-PR(20)782020
During an accident with loss-of-coolant and air ingress in DEMO, the temperature of tungsten first wall cladding may exceed 1000oC and remain for months leading to tungsten oxidation. The radioactive tungsten oxide can be mobilized to the environment at rates of 10 – 150 kg per hour. Smart tungsten-based alloys are under develop…
-
UKAEA-CCFE-CP(20)1042018
During the pre-conceptual design phase of fusion devices such as the European demonstration fusion power plant (DEMO), systems codes provide a fast evaluation of optimal design points and highlight high impact areas. However, determining or evaluating a design point at such an early stage comes with uncertainties in many of the design parameters. T…
-
UKAEA-CCFE-CP(20)832018
The authors exposed a radiatively cooled, lithium-filled tantalum heat pipe (HP) to a hydrogen plasma in DIFFER’s linear plasma source Magnum PSI continuously for ~2 hours. The beam made a saddle-shaped footprint along the side of the inclined ~195-mm-long HP. During several steps with constant overall heat load, we tilted the HP to vary the peak…
-
UKAEA-CCFE-CP(20)762018
In 1998 Makhankov [1] described the concept of modular exchangeable plasma facing components (PFCs) based on liquid metal heat pipes which are radiatively cooled. Here we present results from recent experiments with a lithium filled tubular heat pipe owned by Sandia National Laboratories. The tantalum envelope (~20mm diameter by ~200mm long) was he…
Showing 1 - 10 of 45 UKAEA Paper Results