-
UKAEA-CCFE-PR(25)3272025
High-entropy alloys (HEAs) are being explored as potential candidates for radiation-tolerant materials, with some compositions exhibiting good resistance to defect cluster formation. One such system is WTaCrV, although only a single composition has been experimentally tested under ion irradiation, where it showed phase decomposition at low temperat…
-
2025
This work examines the separatrix and SOL characteristics in three scenarios on JET: the Quasi-Continuous Exhaust (QCE) regime, the core-edge-SOL integrated ITER Baseline scenario, and the X-point Radiator (XPR) regime. All three scenarios are potentially compatible with reactor operations, as they aim to provide power exhaust solutions through dif…
-
UKAEA-CCFE-CP(25)142024
The typical pulse on the JET tokamak is ~10s during the main phase of the discharge, however long discharge operation (>30s) is possible with sufficient preparation and care. During the last period of JET operation in 2023 long pulses in deuterium plasmas were developed to assess the sustainment of the plasma performance over current resistive t…
-
UKAEA-CCFE-PR(25)3202024
The development of a high current baseline scenario (I_p = 3.5MA, q95 ~3.0, beta_N < 2) in deuterium (D), tritium (T) and deuterium-tritium (D-T) for high DT fusion performance at JET with Be/W wall is described. We show that a suitable scenario capable of delivering up to 10 MW of fusion power, depending on the auxiliary heating power avail…
-
UKAEA-CCFE-PR(25)2672024
The first generation of nuclear fusion reactors is expected to operate using a mixture of deuterium(D) and tritium(T) fuel. Controlling the D:T ratio is a promising option to control the fusion burn rate. The Joint European Torus (JET), as the only operational tokamak which can use tritium, is uniquely placed to test th…
-
UKAEA-CCFE-PR(24)2662024
A new type of resonant magnetic perturbation (RMP), generated by helical coils, is proposed for controlling the edge localized mode (ELM) in H-mode tokamak plasmas. The helical coil optimization utilizes the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681) computed linear resistive fluid response of the plasma to the applied RMP field. The opti…
-
UKAEA-CCFE-PR(24)2612024
The fusion reaction between deuterium and tritium, D(T,n)4He is the main source of energy in future thermonuclear reactors. Alpha-particles (4He-ions) born with an average energy of 3.5MeV transferring energy to the thermal plasma during their slowing down, they should provide the self-sustained D-T
-
UKAEA-CCFE-PR(25)2892023
This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to …
-
UKAEA-CCFE-PR(24)2472023
The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasma current, and toroidal magnetic field choices and succeeded in solving the heat load challeng…
-
UKAEA-CCFE-PR(24)2462023
Ion Cyclotron wave (IC) assisted breakdown would be important for reducing risks to plasma initiation during the ITER pre-fusion operation phase under difficult vessel conditions. Hence, studies were performed at JET, at ITER relevant loop electric field — and in a regime, and , where plasma breakdown had not previously been achieved on JE…
Showing 1 - 10 of 34 UKAEA Paper Results