-
UKAEA-CCFE-PR(25)2892023
This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to …
-
UKAEA-CCFE-PR(23)1802023
-
UKAEA-CCFE-PR(22)482022
The evolution of SOL density profiles and fluctuations have been studied at different recycling levels in 3 different tokamaks, ASDEXUpgrade, TCV and JET, all operated in HMode. In all devices we clearly observe an increase of far SOL efolding length at high …
-
UKAEA-CCFE-PR(22)222022
Capacitive plasma pickup is a well-known and difficult problem for plasma-facing edge diagnostics. Ths problem must be addressed to ensure an accurate and robust interpretation of the real signal measurements versus noise. JET’s Faraday cup fast ion loss detector array is particularly prone to this issue and can be used as a …
-
UKAEA-CCFE-PR(23)1002021
The properties of tungsten make it ideal for use as a plasma facing surface in the divertor of large plasma machines such as JET and ITER. However, the intense heat and particle fluxes that fall on the divertor surfaces lead to its release from these surfaces into the plasma and it is necessary to model its transport from the divertor and plasma…
-
UKAEA-CCFE-CP(23)132021
JET has investigated one the key issues for the baseline scenario in ITER, the integration of a radiative divertor for heat load control with the use of neon and nitrogen as seed impurity. A characterization of the choice of the impurity seed on plasma confinement, neutrons, pedestal MHD stability, pedestal instabilities, core transport is given…
-
UKAEA-CCFE-CP(20)1232020
-
UKAEA-CCFE-CP(20)1212020
While current tokamak experiments are beginning to utilise real-time feedback control systems to manage the plasma exhaust, future tokamaks still require validation of theoretical models used to predict the threshold impurity concentration required to facilitate stationary divertor operation. This work exploits new spectroscopic measurements of …
-
UKAEA-CCFE-CP(20)972020
Since 2010, an in-vessel calibration light source (ICLS) has been used periodically on JET to calibrate a range of diagnostics at UV, visible and IR wavelengths. During shutdowns, the ICLS (essentially an integrating sphere) is positioned within the vacuum vessel by the remote handling (RH) system. Following the 2013 run, several changes were made …
-
UKAEA-CCFE-CP(20)982018
Showing 1 - 10 of 23 UKAEA Paper Results